How far have you pushed your Vid Card?

[DarkArctic]

I was just curious as to how far people have overclocked their video card? Here's mine:

Visiontek GeForce3
Core: 220MHz
Mem: 501MHz DDR

I can still push mine a bit further. Maybe some extreme cooling, hmmmm...... :burn:

-DarkArctic

[HugoHenry]

I had a Elsa Gladiac 920( Geforce 3) w a BLue Orb cooler
Core: 250
Ram: 560
3DMark2001 score: 7356

System:
Dual PIII 1GHZ OC to 1.14@152 with DUal MCX370
Abit VP6: Nice board
2GB PC133. Then swapped out for 512 PC150
Ran purty stable.
Now going with the 2000XP when its released and a Gainward TI550. See what I can get outta that.

[-Exi|e-]

GeForce 3Ti200
250/520

[Mykex]

In the sig......

Very stable and smooth even though bumping up any isnt. Must be limited by voltage waiting for an EZ mod. ;)

[TranceBear]

GeForce 2 Pro+ stock 200/400. I have had it up to 300/530 but I have the best gain at the current speeds in my sig.

[adamtekh]

tnt2 179/ 213 with just a 92 mm fan ducted to it , was stable in ut but q3 didnt like it so i had to take it down , adn ive got some driver probs so i dunno if that was the problem

[MrOOBiLL]

GeForce3: 255/520

[Karsta]

Asus V8200d 250/538 MHz. With voltage mods GPU 258 and memory 560. These with Asus heatsinks+AS2.

I'm hoping to get some MHz more with water cooling.

[heavy1]

Visiontek GF3Ti200 runs stable @ 225/475. default is 175/400. could go higher but i start gettin graphic errors like lines across the screen, green and blue patches on the textures etc.

Heavy

[Tebore]

Mine is a older card
ATI Rage Pro 2x (8meg):
Core: 86mhz from 75mhz stock
Memory: 116mhx from 100 stock
NO extra cooling
extremely stable and cool, hey it's runs CS gets about 40-50fps.

[Bmxpunk86pl]

my tnt2 2

original
core 125mhz
memory 150mhz

clocked at
core 140
memory 190mhz.

Not bad for a tnt2 m64

[Default]

radeon 8500 350 core/620 mem with big mutha heatsink and delta. guna stick it in a fridge on newyears day:p

[Cisco Kid]

Default for my Radeon 7500 is 290/460

Got it to 344/566 so far and it will go more with better case ventilation.

I would say this is a pretty good overclock allthough at madonion the top 7500 is something like 350/580 pretty smoking with a 3D Mark 2K1 score near 6000!!

Cisco Kid:)

[Wega!]

It's in the sig... But remember this card is the OEM version, so thte default speed is 250/250MHz....

[NovaCX12]

So far on my Visiontek 6964

265/590 stock cooling with a 92mm blowing @ the memory and chipset. I have ordered my Corb and Tinned Heatsinks, will update when they get installed. Temps @ full load chipset 35C memory 38C

[juliendogg]

i run my 8500(retail) at 310\300(600) stock cooling, completely stable with no artifacts in 3dmark 2k1 or in any games. scored 6400 or so with my slot a 750 oc'd to 990. running on this pos celleron i'm using now the scores are a bit irrelevent i think:( i can push the core all the way up to 350 with no artifacts but it seems my performance dropped a little when past 310 (cooling issue?) the mem seems topped out at 300 any more i get some artifacts in q3a but nowhere else...

[Arkaine23]

Leadtek Geforce2 Ti- 5720 3dmark2k1

stock 250/401, oc'd 255/520. Detonator 23.11's.

http://gamershq.madonion.com/compare2k1.shtml?2371988

[wildone]

PNY Geforce 3 TI 200
225/508@ 150 fsb

245/518@133 fsb

3dmark 2001 is 7928 default benchmark.


wildone

[Cisco Kid]

Originally posted by Arkaime23
Leadtek Geforce2 Ti

stock 250/401, oc'd 250/455. I think this leadtek card's GPU is already OC'd a bit at stock, cuz I get lock-ups and distortions if I raise the GPU any. Maybe I just need to re-seat my Blorb. I can run 3d mark 2000 @ 255/470. Detonator 23.11's.

Just wondering if these posted scores are in 32 bit color or 16 bit? I run at 16 bit most of the time, so my score @1024x768 16bit is 6034... I got it to 6091 once but my comp crashed in Sandra's CPU burn-in after about an hour (FSB @150)


I would say 99.99 percent these are scores at 1024x768 32 bit no one really plays 16 nit that much anymore , but 16 bit allows you to get a higher score.

Cisco Kid:cool:

[wildone]

Not mine its default all the way

1024X768X32

http://gamershq.madonion.com/compare2k1.shtml?2269480

wildone

[Jarek]

Hercules GF 3 Ti 500 @ 270/590 cooled by Alpha 153U.

Come on guys get some real cooling for these things, especialy for the TI500. Cant believe all these *******s charge $ 350/400
and stick a $ 0.99 cooler on them.

Maybe i should not complain, it was a birthday gift from my girlfriend:D

[BigRed]

Radeon 8500 = havent had chance to oc, waiting on RMA

Radeon 32mb DDR = default 165/165 i got it up to 215/215 :D

[CrystalMethod]

Main rig is running non-Oc'd, second system is a Voodoo3 2000 running at 179Mhz, mem non OC'd. I got lower scores past 179 with 3Dmark 2001, and 2000. Artifacts @ 191- 193 depending on which mother board I'm running with.

[splateee]

right now i have mine at 240/540 with no problems, i did however replace the stock fan with a golden dragon orb.

[Pinky]

radeon VIVO 64DDR

stock 198/198

oc'ed 234/234