All -
Long time reader (reason why I purchased what I have) first time poster. Ive searched the forums and saw a few others having this problem, but no solution.
I have tried to overclock my P5N-E SLI Q6600 past an FSB of 300 (QDR =1200). Ive increased the voltage to Vcore (1.40) North (1.59), and memory (2.01).
All other bios options are their defaults.
On reboot it freezes at the startup screen and I cannot get it to pass POST. CPR does not kick in and i have to clear CMOS every time.
Whats interesting is if I use the P5N-E AI OC and select 20% i can boot into windows, but my memory is overclocked and thus the system becomes unstable, so I know my system can get past the 300 FSB.
Any ideas are welcome, as I have spent extra on fans and watercooling because of the ability for this chip+mobo combo for OC.
Thanks
P.S Memory is 2x1Gb Corsair XMS2 PC6400 DDR2 Sticks in the Black slots.
Long time reader (reason why I purchased what I have) first time poster. Ive searched the forums and saw a few others having this problem, but no solution.
I have tried to overclock my P5N-E SLI Q6600 past an FSB of 300 (QDR =1200). Ive increased the voltage to Vcore (1.40) North (1.59), and memory (2.01).
All other bios options are their defaults.
On reboot it freezes at the startup screen and I cannot get it to pass POST. CPR does not kick in and i have to clear CMOS every time.
Whats interesting is if I use the P5N-E AI OC and select 20% i can boot into windows, but my memory is overclocked and thus the system becomes unstable, so I know my system can get past the 300 FSB.
Any ideas are welcome, as I have spent extra on fans and watercooling because of the ability for this chip+mobo combo for OC.
Thanks
P.S Memory is 2x1Gb Corsair XMS2 PC6400 DDR2 Sticks in the Black slots.