- Joined
- Sep 6, 2007
I just installed my first liquid cooling setup the other day and it's all running fine and well.. well that is if 38c idle is normal? Which it is not.. could this be strickly due to the fluid I'm using? I incorrectly read an artical and got this fluid instead of Feser..
D-tek Fuzion 1/2 inch high flow fittings
Swiftech MCP655 12 VDC Pump
Swiftech MCR-220 Radiator 1/2 high flow fittings
FluidXP+
Here are some pictures of the setup..
The coolant runs into a 9 inch cylinder res. with 1/2in high flow fittings mounted on the back side of the motherboard.
I have 2 120mm Thermaltake fans for the front intake, 2 120mm Logisys? fans ontop of the radiator on the interior bottom for exhaust, 120 Antec rear for exhaust and 120mm coolermaster top for exhaust.
Something just doesn't seem right.
Everest tells me 38c for the cpu and Speedfan gives 40c. Anyone have wisdom to share?
D-tek Fuzion 1/2 inch high flow fittings
Swiftech MCP655 12 VDC Pump
Swiftech MCR-220 Radiator 1/2 high flow fittings
FluidXP+
Here are some pictures of the setup..
The coolant runs into a 9 inch cylinder res. with 1/2in high flow fittings mounted on the back side of the motherboard.
I have 2 120mm Thermaltake fans for the front intake, 2 120mm Logisys? fans ontop of the radiator on the interior bottom for exhaust, 120 Antec rear for exhaust and 120mm coolermaster top for exhaust.
Something just doesn't seem right.
Everest tells me 38c for the cpu and Speedfan gives 40c. Anyone have wisdom to share?