View Full Version : What did I do
I took some advise from a friend,and this is the results..
CPU Clock Speed 1561.2
Multiplier=13
FSB 148.7
Clock speed was 1401,is this going to hurt anything,or should I put it back the way it was?
Also he turned the voltage up to 1.8..
seems to work just fine..
It_The_Cow
12-30-01, 08:13 PM
:eh?: Nothing there
wildbilly2k
12-30-01, 09:22 PM
well what are your temps but i dont think it would cause any problems at all
CPU is 44C/MB is 30C
and it has been running all day:)
wildbilly2k
12-30-01, 09:43 PM
how about your load temps but it dont sound like anything is hurting
Originally posted by Dave65
I took some advise from a friend,and this is the results..
CPU Clock Speed 1561.2
Multiplier=13
FSB 148.7
Clock speed was 1401,is this going to hurt anything,or should I put it back the way it was?
Also he turned the voltage up to 1.8..
seems to work just fine..
That should be just fine, check your temps....if they are below 45C under load I would leave it.
:burn: :burn:
How is the best way to check temps under a load,like playing games or something?
I ran Nascar 4 for 3 hours,I can't believe it didn't lock on me,it usually does,but anyway temps got up to 52 C/125 degrees,is this to hot?
some people might say yes but personally i'd say your temps are fine. once you get into the mid to upper 50's then your startin to push it. ive had tbirds and durons runnin at 60 (due to extreme voltage) without a problem.
Heavy
Well it don't matter,it started going into the blue screen syndrome restarting on its own,freezing up ,I am taking XP out and going back to Millenium,XP is nothing but problems for me anyway:mad:
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.