ubuntu errors

[Hardass]

Finally got 2 installed on a Q6600. I have a problem with errors on one.
[11:20:13] Completed 120630 out of 125000 steps (97%)
[11:33:35] Completed 121880 out of 125000 steps (98%)
[11:55:46] ***** Got an Activate signal (2)
[11:55:48] Killing all core threads

Folding@Home Client Shutdown.


--- Opening Log file [March 30 12:16:43]


# SMP Client ################################################## ################
################################################## #############################

Folding@Home Client Version 6.02beta

http://folding.stanford.edu

################################################## #############################
################################################## #############################

Launch directory: /home/folding/FAH
Executable: ./fah6
Arguments: -smp -forceasm -verbosity 9

Warning:
By using the -forceasm flag, you are overriding
safeguards in the program. If you did not intend to
do this, please restart the program without -forceasm.
If work units are not completing fully (and particularly
if your machine is overclocked), then please discontinue
use of the flag.

[12:16:43] - Ask before connecting: No
[12:16:43] - User name: hardass (Team 32)
[12:16:43] - User ID: 4F4C5C190D421E62
[12:16:43] - Machine ID: 2
[12:16:43]
[12:16:43] Loaded queue successfully.
[12:16:43]
[12:16:43] + Processing work unit
[12:16:43] Core required: FahCore_a2.exe
[12:16:43] Core found.
[12:16:43] - Autosending finished units...
[12:16:43] Trying to send all finished work units
[12:16:43] + No unsent completed units remaining.
[12:16:43] - Autosend completed
[12:16:44] Working on Unit 01 [March 30 12:16:44]
[12:16:44] + Working ...
[12:16:44] - Calling './mpiexec -np 4 -host 127.0.0.1 ./FahCore_a2.exe -dir work/ -suffix 01 -checkpoint 30 -forceasm -verbose -lifeline 4833 -version 602'

[12:16:44]
[12:16:44] *------------------------------*
[12:16:44] Folding@Home Gromacs SMP Core
[12:16:44] Version 1.91 (2007)
[12:16:44]
[12:16:44] Preparing to commence simulation
[12:16:44] - Ensuring status. Please wait.
[12:16:44] y forced on.
[12:16:44] - Not checking prior termination.
[12:16:44] Error: Work unit read from disk is invalid
[12:16:44] Finalizing output
[12:16:45] - Expanded 7865403 -> 48331685 (decompressed 68.4 percent)
[12:16:46]
[12:16:46] Project: 2619 (Run 5, Clone 606, Gen 0)
[12:16:46]
[12:16:46] Assembly optimizations on if available.
[12:16:46] Entering M.D.
[12:16:52] Will resume from checkpoint file
[12:17:12] ill resume from checkpoint file
[12:17:24] Completed 121890 out of 125000 steps (98%)
[12:17:24] a_01.log
[12:17:24] Verified work/wudata_01.trr
[12:17:25] Verified work/wudata_01.xtc
[12:17:25] Verified work/wudata_01.edr
[12:17:25] Completed 121890 out of 125000 steps (98%)
[12:32:18] Completed 123130 out of 125000 steps (99%)
[12:46:23] Completed 124380 out of 125000 steps (100%)
[12:54:09]
[12:54:09] Finished Work Unit:
[12:54:09] - Reading up to 7393252 from "work/wudata_01.trr": Read 7393252
[12:54:09] - Reading up to 10370980 from "work/wudata_01.xtc": Read 10370980
[12:54:09] logfile size: 63679
[12:54:09] Leaving Run
[12:54:13] - Writing 17913279 bytes of core data to disk...
[12:54:17] CoreStatus = 0 (0)
[12:54:17] Client-core communications error: ERROR 0x0
[12:54:17] Deleting current work unit & continuing...
[12:58:43] - Warning: Could not delete all work unit files (1): Core file absent
[12:58:43] Trying to send all finished work units
[12:58:43] + No unsent completed units remaining.
[12:58:43] - Preparing to get new work unit...
[12:58:43] + Attempting to get work packet
[12:58:43] - Will indicate memory of 500 MB
[12:58:43] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 15, Stepping: 8
[12:58:43] - Connecting to assignment server
[12:58:43] Connecting to http://assign.stanford.edu:8080/
[12:58:44] Posted data.
[12:58:44] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[12:58:44] + News From Folding@Home: Welcome to Folding@Home
[12:58:44] Loaded queue successfully.
[12:58:44] Connecting to http://171.64.65.56:8080/
[12:58:53] Posted data.
[12:58:53] Initial: 0000; - Receiving payload (expected size: 7865915)
[12:59:03] - Downloaded at ~768 kB/s
[12:59:03] - Averaged speed for that direction ~640 kB/s
[12:59:03] + Received work.
[12:59:03] + Closed connections
[12:59:08]
[12:59:08] + Processing work unit
[12:59:08] Core required: FahCore_a2.exe
[12:59:08] Core found.
[12:59:08] Working on Unit 02 [March 30 12:59:08]
[12:59:08] + Working ...
[12:59:08] - Calling './mpiexec -np 4 -host 127.0.0.1 ./FahCore_a2.exe -dir work/ -suffix 02 -checkpoint 30 -forceasm -verbose -lifeline 4833 -version 602'

[12:59:08]
[12:59:08] *------------------------------*
[12:59:08] Folding@Home Gromacs SMP Core
[12:59:08] Version 1.91 (2007)
[12:59:08]
[12:59:08] Preparing to commence simulation
[12:59:08] - Ensuring status. Please wait.
[12:59:25] - Assembly optimizations manually forced on.
[12:59:25] - Not checking prior termination.
[12:59:25] Error: Work unit read from disk is invalid
[12:59:25] Finalizing output
[12:59:28] - Expanded 7865403 -> 48331685 (decompressed 68.4 percent)
[12:59:29]
[12:59:29] Project: 2619 (Run 5, Clone 606, Gen 0)
[12:59:29]
[12:59:30] Assembly optimizations on if available.
[12:59:30] Entering M.D.
[12:59:48] Completed 10 out of 125000 steps (0%)
[13:06:24] Completed 630 out of 125000 steps (1%)
[13:23:30] Completed 1880 out of 125000 steps (2%)
[13:43:48] Completed 3130 out of 125000 steps (3%)

Then I get this one:
[10:02:39] Completed 84380 out of 125000 steps (68%)
[10:21:26] Completed 85630 out of 125000 steps (69%)
[10:40:14] Completed 86880 out of 125000 steps (70%)
[10:53:09] CoreStatus = 0 (0)
[10:53:09] Client-core communications error: ERROR 0x0
[10:53:09] Deleting current work unit & continuing...
[10:57:32] - Warning: Could not delete all work unit files (2): Core file absent
[10:57:33] Trying to send all finished work units
[10:57:33] + No unsent completed units remaining.
[10:57:33] - Preparing to get new work unit...
[10:57:33] + Attempting to get work packet
[10:57:33] - Will indicate memory of 500 MB
[10:57:33] - Connecting to assignment server
[10:57:33] Connecting to http://assign.stanford.edu:8080/
[10:57:33] Posted data.
[10:57:33] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[10:57:33] + News From Folding@Home: Welcome to Folding@Home
[10:57:33] Loaded queue successfully.
[10:57:33] Connecting to http://171.64.65.56:8080/
[10:57:42] Posted data.
[10:57:42] Initial: 0000; - Receiving payload (expected size: 7865915)
[10:57:52] - Downloaded at ~768 kB/s
[10:57:52] - Averaged speed for that direction ~682 kB/s
[10:57:52] + Received work.
[10:57:52] + Closed connections
[10:57:57]
[10:57:57] + Processing work unit
[10:57:57] Core required: FahCore_a2.exe
[10:57:57] Core found.
[10:57:57] Working on Unit 03 [March 31 10:57:57]
[10:57:57] + Working ...
[10:57:57] - Calling './mpiexec -np 4 -host 127.0.0.1 ./FahCore_a2.exe -dir work/ -suffix 03 -checkpoint 30 -forceasm -verbose -lifeline 4833 -version 602'

[10:57:57]
[10:57:57] *------------------------------*
[10:57:57] Folding@Home Gromacs SMP Core
[10:57:57] Version 1.91 (2007)
[10:57:57]
[10:57:57] Preparing to commence simulation
[10:57:57] - Ensuring status. Please wait.
[10:58:14] - Assembly optimizations manually forced on.
[10:58:14] - Not checking prior termination.
[10:58:14] Error: Work unit read from disk is invalid
[10:58:14] Finalizing output
[10:58:17] - Expanded 7865403 -> 48331685 (decompressed 68.4 percent)
[10:58:18]
[10:58:18] Project: 2619 (Run 5, Clone 606, Gen 0)
[10:58:18]
[10:58:21] Assembly optimizations on if available.
[10:58:21] Entering M.D.
[10:58:44] Completed 10 out of 125000 steps (0%)
[11:10:05] Completed 630 out of 125000 steps (1%)
[11:31:09] Completed 1880 out of 125000 steps (2%)
[12:01:22] Timer requesting checkpoint
[12:11:43] steps (3%)
[12:11:43] 0 out of 125000 steps (3%)
[12:16:49] - Autosending finished units...
[12:16:49] Trying to send all finished work units
[12:16:49] + No unsent completed units remaining.
[12:16:49] - Autosend completed
[12:30:33] steps (4%)
[12:30:33] 0 out of 125000 steps (4%)
[12

[Hardass]

It had another error right after that. I have shut it down until I can find problem.

['Cuda340]

Assuming the rig is stable, try assigning more memory to the vm's. The 2619's seem to require more memory than most wu's.
I've been getting 2619 x 2 on one machine for a few days now with no issues. I'd given each vm 748MB ram.

[thideras]

Try running it with the "sudo" command leading....it looks like it isn't saving/deleting anything.

[Hardass]

Try running it with the "sudo" command leading....it looks like it isn't saving/deleting anything.

Can you explain this?

[thideras]

Can you explain this?cd into the folder, type:

sudo ./fah6 -smp -verbosity 9

It will ask you for your password, just use your own account's password. You don't need that forceasm, that is implied.

[Hardass]

cd into the folder, type:

sudo ./fah6 -smp -verbosity 9

It will ask you for your password, just use your own account's password. You don't need that forceasm, that is implied.

I will try this as soon as the first one completes and sends. It is at 98%. Then I will restart both using this and increased ram setting.

[thideras]

Awesome, keep us updated :)

[Hardass]

2nd one finished then deleted unit without sending.
[17:19:10] Completed 124380 out of 125000 steps (100%)
[17:26:00]
[17:26:00] Finished Work Unit:
[17:26:00] - Reading up to 7393252 from "work/wudata_02.trr": Read 7393252
[17:26:00] - Reading up to 10387052 from "work/wudata_02.xtc": Read 10387052
[17:26:02] logfile size: 63544
[17:26:02] Leaving Run
[17:26:05] - Writing 17929216 bytes of core data to disk...
[17:26:10] CoreStatus = 0 (0)
[17:26:10] Client-core communications error: ERROR 0x0
[17:26:10] Deleting current work unit & continuing...
[17:30:36] - Warning: Could not delete all work unit files (2): Core file absent
[17:30:36] Trying to send all finished work units
[17:30:36] + No unsent completed units remaining.
[17:30:36] - Preparing to get new work unit...
[17:30:36] + Attempting to get work packet
[17:30:36] - Will indicate memory of 500 MB
[17:30:36] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 15, Stepping: 8
[17:30:36] - Connecting to assignment server
[17:30:36] Connecting to http://assign.stanford.edu:8080/
[17:30:37] Posted data.
[17:30:37] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[17:30:37] + News From Folding@Home: Welcome to Folding@Home
[17:30:37] Loaded queue successfully.
[17:30:37] Connecting to http://171.64.65.56:8080/
[17:30:45] Posted data.
[17:30:45] Initial: 0000; - Receiving payload (expected size: 7861010)

[thideras]

Is that while running it with sudo???

EDIT: You didn't run the update by any chance did you?

0x0 errors are Unix Specific and under Linux this error often can be related to Glibc incompatibility

If this is VMWare, nuke it and re-install, do NOT update the system at all.

[Hardass]

Is that while running it with sudo???

EDIT: You didn't run the update by any chance did you?



If this is VMWare, nuke it and re-install, do NOT update the system at all.

If I do not update how do I get the ia32-libs

[Hardass]

It is VMware, I followed the thread here exaxctly. And no this is the one without using sudo.

[thideras]

If I do not update how do I get the ia32-libssudo apt-get install ia32-libsTechnically that isn't updating since it isn't installed.

I had serious issues with updating it and trying to fold...

[Hardass]

sudo apt-get install ia32-libsTechnically that isn't updating since it isn't installed.

Hell I will try anything once. Been trying to get this installed and running for 2 weeks.

[thideras]

Hell I will try anything once. Been trying to get this installed and running for 2 weeks.Instead of nuking the one you have, just create a new one.

I also would HIGHLY suggest getting the "server" version as there is no GUI by default or any other "crap" that comes with the desktop version :)

It is also easier to work with since it is completely CLI. I would be willing to help you out if you wanted to go that route.

[Hardass]

On the VM setup. Do I use scsi or ide, any other setup tips? I am setting at 748mb ram. Anything else?

[thideras]

On the VM setup. Do I use scsi or ide, any other setup tips? I am setting at 748mb ram. Anything else?SCSI, 768 is enough. Did you do the "custom" setup?

[Hardass]

SCSI, 768 is enough. Did you do the "custom" setup?

I am running VMware Server Console. Yes running custom setup.

[Hardass]

On the disk setup? Go with virtual disk and let it setup?

[thideras]

I am running VMware Server Console. Yes running custom setup.Awesome and awesome :)

Basically:

Install
sudo apt-get install links ia32-libs
links folding.stanford.edu/English/Download
Download the file
./fah6 -smp -verbosity 9

Done

I have never had an issue running F@H and VMWare following that ;)

[Hardass]

I still create the FAH folder correct?

[thideras]

I still create the FAH folder correct?No need unless you use the OS for something else. Since it defaults, it is just easier to login and do "./fah -smp" and hit enter.

[Hardass]

I am installing from ISO file. When do I change setting back to cdrom from ISO file?

[thideras]

I am installing from ISO file. When do I change setting back to cdrom from ISO file?I would say after the restart. Don't let it boot to it though :)

[Hardass]

I would say after the restart. Don't let it boot to it though :)

Too late. Also downloaded fah file, but ./fah6 -smp -verbosity 9 get no such file.

[Hardass]

Here is ss.
http://img.photobucket.com/albums/v214/hardass/Ubuntu%20setup/th_ubuntu.jpg (http://img.photobucket.com/albums/v214/hardass/Ubuntu%20setup/ubuntu.jpg)

[WarriorII]

Too late. Also downloaded fah file, but ./fah6 -smp -verbosity 9 get no such file.

I'm a little late here.

That is a command not a file.

Remove CD & reboot system. That will help A LOT ! :p

/try again

[WarriorII]

Open the FAH6.02beta-1linux Folder, what is the FAH. EXE file called inside?

[Hardass]

Inside folder
http://img.photobucket.com/albums/v214/hardass/Ubuntu%20setup/th_ubuntu2.jpg (http://img.photobucket.com/albums/v214/hardass/Ubuntu%20setup/ubuntu2.jpg)

[thideras]

Too late. Also downloaded fah file, but ./fah6 -smp -verbosity 9 get no such file.:confused: Did you save the file??

Doing an 'ls' shows?


EDIT: Too late. You have to extract them...

[Hardass]

Everybody remember I know jack about this setup? I saved the file you can see it in ss. I then extracted it. You can see that.

[jonspd]

tis a pain trust me I know and make sure your using the 64 bit version of ubuntu not 32 bit...

[Hardass]

Yep 64bit.

[jonspd]

I ran the vmware route for about a week and it was enough headache that I resulted in just running a single winsmp client for less troubles :D

chasr and others I'm sure will agree that it's much better as far as PPD go to use 2xvmware however.

[Hardass]

Created folder FAH extracted fah6 to it
Typed
cd ./FAH
chmod +x fah6
./fah6 -smp -verbosity 9
program setup and started. Looks like error right off the bat:

[19:20:17] Initial: 28F5; + 1781760 bytes downloaded
[19:20:17] Initial: AA46; + 1792000 bytes downloaded
[19:20:17] Initial: B945; + 1802240 bytes downloaded
[19:20:17] Initial: 14E6; + 1810930 bytes downloaded
[19:20:18] Verifying core Core_a2.fah...
[19:20:18] Signature is VALID
[19:20:18]
[19:20:18] Trying to unzip core FahCore_a2.exe
[19:20:18] Decompressed FahCore_a2.exe (4515008 bytes) successfully
[19:20:18] + Core successfully engaged
[19:20:23]
[19:20:23] + Processing work unit
[19:20:23] Core required: FahCore_a2.exe
[19:20:23] Core found.
[19:20:23] Working on Unit 01 [March 31 19:20:23]
[19:20:23] + Working ...
[19:20:23] - Calling './mpiexec -np 4 -host 127.0.0.1 ./FahCore_a2.exe -dir work/ -suffix 01 -checkpoint 30 -verbose -lifeline 6503 -version 602'

[19:20:23]
[19:20:23] *------------------------------*
[19:20:23] Folding@Home Gromacs SMP Core
[19:20:23] Version 1.91 (2007)
[19:20:23]
[19:20:23] Preparing to commence simulation
[19:20:23] - Ensuring status. Please wait.
[19:20:23] Working with standard loops onError: Work unit read from disk is invalid
[19:20:23] Finalizing output
[19:20:23]
[19:20:23] - Files status OK
[19:20:23] Error: Work unit read from disk is invalid
[19:20:23] Finalizing output
[19:20:26] - Expanded 7865574 -> 48331685 (decompressed 68.4 percent)
[19:20:28]
[19:20:28] Project: 2619 (Run 8, Clone 671, Gen 0)
[19:20:28]
[19:20:29] Entering M.D.
[19:20:42] rcent)
[19:20:42]
[19:20:42] Project: 2619 (Run 8, Clone 671, Gen 0)
[19:20:42]
[19:20:43] Entering M.D.
[19:21:00] Completed 10 out of 125000 steps (0%)

[Hardass]

screenshot of folder setup:
http://img.photobucket.com/albums/v214/hardass/Ubuntu%20setup/th_ubuntu3.jpg (http://img.photobucket.com/albums/v214/hardass/Ubuntu%20setup/ubuntu3.jpg)

[WarriorII]

Back off you overclock.

I think it is unstable.

Let me see if I can find my post ChasR helped me with reciently.

[WarriorII]

http://www.ocforums.com/showthread.php?t=553743


See post #4 for Log.

I backed off the OC and it runs fine now.

Strange thing, I ran a Boat load of Benchies in windows at some good speeds and then installed my Ubuntu hdd & it errored out.

I guess Linux is a bit more touchy than windows.

[Hardass]

Back off you overclock.

I think it is unstable.

Let me see if I can find my post ChasR helped me with reciently.

Reg smp runs fine on this setup. Have been for months.

[WarriorII]

Ok, you are talking FAH client, not OS now.

Which Ubuntu do you have that you are trying to install on?

[Hardass]

Running XP Pro, Installed VMware server, created a2x VM;s nstalled ubuntu 64bit via ISO file on hdd.
Followed the thread here for setup.

[WarriorII]

Ok, you passed me up after you installed VMware. :-/

Cr@p.

I run straight Linux right now. Sorry I can't be more help.

[Hardass]

It is not overclock related. Just backed rig down from 3.6 to 3.4 nothing else running and got same error.
Launch directory: /home/folding/FAH
Executable: ./fah6
Arguments: -smp -verbosity 9

[19:58:30] - Ask before connecting: No
[19:58:30] - User name: hardass (Team 32)
[19:58:30] - User ID: 325D42AD1C71B48E
[19:58:30] - Machine ID: 1
[19:58:30]
[19:58:30] Loaded queue successfully.
[19:58:30]
[19:58:30] + Processing work unit
[19:58:30] Core required: FahCore_a2.exe
[19:58:30] Core found.
[19:58:30] - Autosending finished units...
[19:58:30] Trying to send all finished work units
[19:58:30] + No unsent completed units remaining.
[19:58:30] - Autosend completed
[19:58:30] Working on Unit 01 [March 31 19:58:30]
[19:58:30] + Working ...
[19:58:30] - Calling './mpiexec -np 4 -host 127.0.0.1 ./FahCore_a2.exe -dir work/ -suffix 01 -checkpoint 30 -verbose -lifeline 4888 -version 602'

[19:58:30]
[19:58:30] *------------------------------*
[19:58:30] Folding@Home Gromacs SMP Core
[19:58:30] Version 1.91 (2007)
[19:58:30]
[19:58:30] Preparing to commence simulation
[19:58:30] - Ensuring status. Please wait.
[19:58:48] - Looking at optimizations...
[19:58:48] - Working with standard loops on this execution.
[19:58:48] - Previous termination of core was improper.
[19:58:48] - Going to use standard loops.
[19:58:48] - Files status OK
[19:58:48] Error: Work unit read from disk is invalid
[19:58:48] Finalizing output
[19:58:56] - Expanded 7865574 -> 48331685 (decompressed 68.4 percent)
[19:58:59]
[19:58:59] Project: 2619 (Run 8, Clone 671, Gen 0)
[19:58:59]
[19:59:00] Entering M.D.

[WarriorII]

try -forceasm -verbosity 9 -smp

what happens if you just let it run after it say it found an error?

[Hardass]

Deleted old one, started a new one using your flags.
--- Opening Log file [March 31 20:07:45]


# SMP Client ################################################## ################
################################################## #############################

Folding@Home Client Version 6.02beta

http://folding.stanford.edu

################################################## #############################
################################################## #############################

Launch directory: /home/folding/FAH
Executable: ./fah6
Arguments: -forceasm -verbosity 9 -smp

Warning:
By using the -forceasm flag, you are overriding
safeguards in the program. If you did not intend to
do this, please restart the program without -forceasm.
If work units are not completing fully (and particularly
if your machine is overclocked), then please discontinue
use of the flag.

[20:07:45] Configuring Folding@Home...


[20:08:57] - Ask before connecting: No
[20:08:57] - User name: hardass (Team 32)
[20:08:57] - User ID not found locally
[20:08:57] + Requesting User ID from server
[20:08:57] - Getting ID from AS:
[20:08:57] Connecting to http://assign.stanford.edu:8080/
[20:08:57] Posted data.
[20:08:57] Initial: 961E; - Received User ID = 1E962C085C3EED84
[20:08:57] - Machine ID: 1
[20:08:57]
[20:08:57] Work directory not found. Creating...
[20:08:57] Could not open work queue, generating new queue...
[20:08:57] - Preparing to get new work unit...
[20:08:57] + Attempting to get work packet
[20:08:57] - Will indicate memory of 752 MB
[20:08:57] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 15, Stepping: 8
[20:08:57] - Connecting to assignment server
[20:08:57] Connecting to http://assign.stanford.edu:8080/
[20:08:57] - Autosending finished units...
[20:08:57] Trying to send all finished work units
[20:08:57] + No unsent completed units remaining.
[20:08:57] - Autosend completed
[20:08:58] Posted data.
[20:08:58] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[20:08:58] + News From Folding@Home: Welcome to Folding@Home
[20:08:58] Loaded queue successfully.
[20:08:58] Connecting to http://171.64.65.56:8080/
[20:09:06] Posted data.
[20:09:06] Initial: 0000; - Receiving payload (expected size: 7865673)
[20:10:40] - Downloaded at ~81 kB/s
[20:10:40] - Averaged speed for that direction ~81 kB/s
[20:10:40] + Received work.
[20:10:40] + Closed connections
[20:10:40]
[20:10:40] + Processing work unit
[20:10:40] Core required: FahCore_a2.exe
[20:10:40] Core not found.
[20:10:40] - Core is not present or corrupted.
[20:10:40] - Attempting to download new core...
[20:10:40] + Downloading new core: FahCore_a2.exe
[20:10:40] Downloading core (/~pande/Linux/x86//Core_a2.fah from www.stanford.edu)
[20:10:41] Initial: AFDE; + 10240 bytes downloaded
[20:10:41] Initial: 97D3; + 20480 bytes downloaded
[20:10:41] Initial: 4B00; + 30720 bytes downloaded
I Edited out some of the download.LOL
[20:11:01] Initial: 14E6; + 1810930 bytes downloaded
[20:11:01] Verifying core Core_a2.fah...
[20:11:01] Signature is VALID
[20:11:01]
[20:11:01] Trying to unzip core FahCore_a2.exe
[20:11:01] Decompressed FahCore_a2.exe (4515008 bytes) successfully
[20:11:01] + Core successfully engaged
[20:11:06]
[20:11:06] + Processing work unit
[20:11:06] Core required: FahCore_a2.exe
[20:11:06] Core found.
[20:11:06] Working on Unit 01 [March 31 20:11:06]
[20:11:06] + Working ...
[20:11:06] - Calling './mpiexec -np 4 -host 127.0.0.1 ./FahCore_a2.exe -dir work/ -suffix 01 -checkpoint 30 -forceasm -verbose -lifeline 5031 -version 602'

[20:11:06]
[20:11:06] *------------------------------*
[20:11:06] Folding@Home Gromacs SMP Core
[20:11:06] Version 1.91 (2007)
[20:11:06]
[20:11:06] Preparing to commence simulation
[20:11:06] - Ensuring status. Please wait.
[20:11:06] Finalizing output
[20:11:08] - Expanded 7865161 -> 48331685 (decompressed 68.4 percent)
[20:11:08]
[20:11:08] Project: 2619 (Run 8, Clone 526, Gen 0)
[20:11:08]
[20:11:08] Assembly optimizations on if available.
[20:11:08] Entering M.D.
[20:11:25] on if available.
[20:11:25] Entering M.D.
[20:11:42] Completed 10 out of 125000 steps (0%)

[jonspd]

looks like its working :D

[Hardass]

looks like its working :D

We shall see. When it finishes and sends a completed unit, then we know it works correctly. Thanks for the help guys. It is appreciated.

[Hardass]

Thanks guys. Have 2 units running on the QX6700. Appreciate all the help.

['Cuda340]

Glad you got it rock'in :beer:

Fold on :attn:

[WarriorII]

Pulled that Rabbit.... :rolleyes:

:D

Glad it's working. Let us know what kind of ppd you are seeing.
:attn:

[Hardass]

Really do not think I am ready to tackle installing fahmon just yet.:eek:

[ChasR]

I'm sorry I didn't get here sooner. The problem you're having is related to memory assigned the VM, p2619 AND Ubuntu's default swap file size which, for some reason (probably based on the size of the virtual drive), varies from install to install. P2619 takes 800 MB by its self. If you have only 700 MB in the vm and a smallish swap, the WU dies when memory and swap space get used up. Make sure your machine isn't configured for -adv WUs and delete the work dir, queue.dat and machinedependent.dat until you are no longer assigned a p2619 and you may not get another.

[Hardass]

This machine has 4gigs of ram, would it not be easier to just increase available ram to each vm? And it completed that 2619.

[ChasR]

Sure, give each VM 1 GB of ram and it'll work fine and stay out of the swap file most of the time. However, you may find you want to avoid p2619 because of lower ppd than p2653 and p2605 and if you get one on each VM, ppd goes down significantly.

[Hardass]

I took your advice and fixed both. Now running 2x 2605 Thanks for advice. Have another question! When I start to work or change one vm, should I first shutdown the secondvm. I noticed when I shut down one vm to make changes, the second errored. Or was it because I was running 2x 2619??

[Hardass]

I have a Q6600 running in a P5B Deluxe, that does not allow me to enable the vanderpool option. Does anyone know if there is a different bios for this mobo that allows enabling this. Would like to install 2 units on it.
Got it. Just had to shut down, turn off psu. restart and go direct to bios. Then you can enable vanderpool.

[Hardass]

I tried to install on the P5B Deluxe. Setup same as the first rig, but this one will not find the ia32-libs. Will not show updates available. Tried downloading ubuntu 7.10 twice and same thing.

[Jolly-Swagman]

I too had some issues running FAH on Ubuntu 7.10 64bit but don't have any issues running Ubuntu 6.06 64bit under VMware and after updates ia32-libs are already there.

[ChasR]

7.10 should run on a P5B deluxe. I've got it running fine on the P5B vanilla, Commando, P5K vanilla, P5K Premium WI/FI. You need to have the network cable plugged in when you install Ubuntu for it to auto configure network access and security settings. You probably can't download any packages at all, not just ia32-libs.

[Hardass]

7.10 should run on a P5B deluxe. I've got it running fine on the P5B vanilla, Commando, P5K vanilla, P5K Premium WI/FI. You need to have the network cable plugged in when you install Ubuntu for it to auto configure network access and security settings. You probably can't download any packages at all, not just ia32-libs.

It has internet access. I downloaded ubuntu.