Whats your GeForce 2 Ultra OC??

[rUfUnKy]

JUst wondering what your highest, stable OC is on this card........I'm @ 265/485 havn't tried any higher.....

[Kent]

My CL GeForce 2 Ultra ran for over a year at 500 with only a couple extra case fans. It was still running perfect when I replaced it with a Leadtek GeForce 3 Ti500.

[Silversinksam]

My leadtek Gf2 Ultra did 330/535

Just gave it away to a friend of mine as he got hurt on the job in the Army and has limited funds, and the Army screwin him around trying to give him a ridiculous percentage as they are booting him, so it was an xmas gift during his tough time (he has a doodoo 2 pci, and he loves Counter-Strike and its a good step up for him :p )

[Subzer0]

i run my hercules prophet2 ultra @300/500 (nice and even eh?)
and no hicups at all,no artifacts, but im not sure what to think of my 3dmark2000 scores.. im getting around the 10700 mark.

[Cisco Kid]

Originally posted by Subzer0
i run my hercules prophet2 ultra @300/500 (nice and even eh?)
and no hicups at all,no artifacts, but im not sure what to think of my 3dmark2000 scores.. im getting around the 10700 mark.

What do you get in 3D Mark2K1 btw, I would be interested to compare to my overclocked 7500.

Cisco Kid

[Arkaine23]

255/520 on this Leadtek Ti... memory will go a little higher I think. 5698 default 3dmark2k1.

http://gamershq.madonion.com/compare2k1.shtml?2371988

[Subzer0]

Originally posted by Cisco Kid


What do you get in 3D Mark2K1 btw, I would be interested to compare to my overclocked 7500.

Cisco Kid

sorry i didnt get back to you on that 1!
i have had problems with 2001 ,im not sure if its the mobo drivers or the cards drivers but ill open it up and it just closes after maybe the 2nd 4wd scene..................

[AS5AS51N]

i have a elsa and i oc'ed it to 285/510. im pretty sure i could go higher but ehh.

[Subzer0]

ok i got 2001 to work and im not happy with the score..damb just reached 5000, thats terrible man, any1 know why?
it was the default bm too

[Cisco Kid]

Originally posted by Subzer0
ok i got 2001 to work and im not happy with the score..damb just reached 5000, thats terrible man, any1 know why?
it was the default bm too


Thats about what you can expect, the rest of any increase would come from drivers, and tweaking plus your cpu,ram and mobo

Cisco Kid:)

[Pinky]

Had a hercules gf2 ultra for about 1 week. Got her to 270/500. The memory (think it was 4.5ns) seemed to be limited...

[Warlord2]

I keep my Visiontek gf2 ultra at 300/500 most of the time but during benchmarking I go up to 315/520

Im sure with better cooling I can go higher

[rUfUnKy]

Originally posted by Warlord2
I keep my Visiontek gf2 ultra at 300/500 most of the time but during benchmarking I go up to 315/520

Im sure with better cooling I can go higher Is that with stock cooling? I don't think I can get my GPU that high even with my lapped blorb...I have to ditch those plastic clips ..I don't think it's holding my blorb up tight against the core..:rolleyes:

[rogue1979]

I resistor modded my Gainward Geforce2 Ti 500 to a Quadro2 Pro, flashed to the Nvidia Geforce2 Ti reference bios. At 285/523, 23.11 detonator, Windows 98, on a 167MHz fsb my 3DMark 2001 is 5512.

[Silver]

Glad to see these results as I do not feel so bad about my poor Leadtek pro gf2 32 meg scoring 4943. I figure I can still get to 5000, just have'nt figured out how yet with out using some funky program that gives a good score but is unusable for anything else. Will keep trying different settings. About all that is left is fsb and drivers.

[theflyingrat]

I'm running 23.10s on my Ultra. It's a Leadtek, and has 4ns memory, and therefore hits 500 MHz memory quite easily. My stable, no-artifacts, no-freezing clock is 280 Core/520 mem. I've run 10062 in 3DMark 2000 (default res.) and 5170 in 3DMark2001 (default res.) I'm very happy with it; I've had it for almost a year now, and I can't seem to kill it!

[Dave65]

GForce 2 ultra runs 295/504 with no problems so far:D

[Warlord2]

Is that with stock cooling? I don't think I can get my GPU that high even with my lapped blorb...I have to ditch those plastic clips ..I don't think it's holding my blorb up tight against the core..

is a p1 heatsink that was on my packbell comp

I have a 92mm fan blowing on the card from the side of the case and a 80mm blowing on the card from under the card

the heatsink is just on there with AS2 and superglue on the corners

I had to put lots of past sense the gpu wasnt flat at all:eek:

[Silver]

Lapped my gpu and used an ocz dominator on it. Ys fan was too loud for me so changed it to 7v.