PDA

View Full Version : Crucial Ballistix PC-8500/Abit IP35 PRO

nezos
05-01-08, 08:45 AM
hello

i bought this modules 1 week ago ,and i cannot clock them as a i want
i cannot take more than 1100mhz.(5-5-5-15)
i check the dividers also and nothing.i would like to know if there is a wall at 1100mhz with settings or sth else .

here is a pic
meionm
05-01-08, 08:49 AM
What voltage are you using?
nezos
05-01-08, 08:50 AM
my timings is
(tCL) 5
(tRCD) 5
(tRP) 5
(tRAS) 15
(tRFC) auto or 43-52
(tWR) auto
(tWTR) auto
(tRRD) auto
(tRTP) auto
2T
nezos
05-01-08, 08:51 AM
at 1080 -1100mhz (2.2v)

but even more than 2.2v i dont take any boot more than 1100mhz
meionm
05-01-08, 09:38 AM
You could try increasing northbridge voltage.

Is that single or double sided memory?
nezos
05-01-08, 10:17 AM
ye it is a single sided.

i also try increase NB voltage but no results
theELVISCERATOR
05-01-08, 10:45 AM
No such thing as a guaranteed oc..mine run faster then yours but YMMV..
Sam__
05-01-08, 11:11 AM
No such thing as a guaranteed oc..mine run faster then yours but YMMV..

exactly. no OCs are EVER guaranteed. you may just have bad sticks.
nezos
05-01-08, 11:13 AM
omg i think that stick of crucial Sucksss

i have a Transend axeram kit 2x1gb 800mhz and i clock 1140mhz 5-5-5-15 (double sided/with N beside the codebar)
meionm
05-01-08, 01:04 PM
Single sided crucials appear not doing that well as double sided ones.
maxfly
05-01-08, 06:27 PM
thats actually pretty good for the single sided modules.most can hardly maintain stock speeds from what ive seen.
nezos
05-02-08, 12:16 AM
guys i need ur help.
i am thinking to buy a new kit 2x1gb or 2x2gb would u suggest me anything ???

thanxs in advance .

(i am thinking of G.skill 2x1gb 1066. do u know if this memory modules are single or double sided)

http://www.e-shop.gr/show_per.phtml?id=PER.554817

http://www.e-shop.gr/show_per.phtml?id=PER.554816
cabose1227
05-02-08, 12:26 AM
these!
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231148&Tpk=gskill
nezos
05-02-08, 12:36 AM
After i finish my search for this modules Crucial Ballistix BL12864AL1065.8FE5
its seems to sucks and i was not lucky.
So i have to rma back and choose 2x2gb kit for my abit <--- love


i should go 2x2gb 800mhz or 1066mhz ????? ( 1200-1250 mhz 5-5-5-15)
i see many ppl use G.skill but i am very carefull what i am gonna buy .

so i need ur opinion .

what do u think about these http://www.memoryc.com/computermemory/ddr2ram/2gbgskillpc26400hzseries.html