kallegbg
01-03-02, 03:25 PM
Hi!
I have a little problem with my "Asus p4b" card.?
What im trying to do:
Run my processor in the mode: 133 x 13 (1700 Mhz)
it only runs: 100 x 17 by default.
My System spec:
Asus p4b
Intel Pentium 4 - 1,7 Ghz (Socket 478, 400mhz system bus)
Kingston 512Mb - 133 Memmory
Problem Description:
If i set the option "CPU SPEED: MANUAL" in bios, only the "CPU FREQUENCY" gets enabled. The "CPU FREQUENCY MULTIPLE" stays Grey. (17x) I want to adjust it to (13x) to run my Processor in 133 x 13.
I have tried to do this manual by changing the Dip switches, but when i run 133 x 13 the system doesent start. If i use 125 mhz om the systembus the system boots fine.
Best Regards
Karl-johan
I have a little problem with my "Asus p4b" card.?
What im trying to do:
Run my processor in the mode: 133 x 13 (1700 Mhz)
it only runs: 100 x 17 by default.
My System spec:
Asus p4b
Intel Pentium 4 - 1,7 Ghz (Socket 478, 400mhz system bus)
Kingston 512Mb - 133 Memmory
Problem Description:
If i set the option "CPU SPEED: MANUAL" in bios, only the "CPU FREQUENCY" gets enabled. The "CPU FREQUENCY MULTIPLE" stays Grey. (17x) I want to adjust it to (13x) to run my Processor in 133 x 13.
I have tried to do this manual by changing the Dip switches, but when i run 133 x 13 the system doesent start. If i use 125 mhz om the systembus the system boots fine.
Best Regards
Karl-johan