View Full Version : 1.2 Celly on ST6-Raid up and runnin'
Running on ST6-Raid at 1516 125 FSB 4:4:1 1.65v (with vid pinning, thanks ol'man it was a piece of cake). Running Prime95 right now peak temps varying between 34-35C. Lapped both the IHS and Glaciator II with 1500. Nice and smoooth!
On another note, isn't there a proggie that lists the current AGP and PCI frequencies? I thought I saw them before in Sandra but I sure can't find them now. Also why does Sandra and MBM report the CPU at 1516 when the bios is set to 125 x 12(1500)?
ol' man
01-03-02, 10:45 PM
Originally posted by Sempei
Running on ST6-Raid at 1516 125 FSB 4:4:1 1.65v (with vid pinning, thanks ol'man it was a piece of cake). Running Prime95 right now peak temps varying between 34-35C. Lapped both the IHS and Glaciator II with 1500. Nice and smoooth!
On another note, isn't there a proggie that lists the current AGP and PCI frequencies? I thought I saw them before in Sandra but I sure can't find them now. Also why does Sandra and MBM report the CPU at 1516 when the bios is set to 125 x 12(1500)?
Cause your chip is actually running a 126fsb. Check it with wcpuid and it will say that.
I'm up to 1553 @129FSB 1.75v. Temps running Prime95 37-38C.
ol' man
01-05-02, 11:33 PM
Originally posted by Sempei
I'm up to 1553 @129FSB 1.75v. Temps running Prime95 37-38C.
Nice OC:) Temps are really nice too! You may hit 1600MHz on 1.8v!
Originally posted by ol' man
Nice OC:) Temps are really nice too! You may hit 1600MHz on 1.8v!
Thanks ol' man I'm hoping. Do yuo have any idea how the AGP dividers work on these ST6 boards? There's no divider in the bios and Sandra won't report my bus speeds.
tainice
01-05-02, 11:57 PM
man, hope i will be as luck as u..from now on, i may stock with retail chips only, i heard that usually those are better than oem version of chips, stepping wise.
Originally posted by tainice
man, hope i will be as luck as u..from now on, i may stock with retail chips only, i heard that usually those are better than oem version of chips, stepping wise.
This is actually an OEM Malay chip but it seems to be working pretty well for me.
ol' man
01-06-02, 12:20 AM
If you set it too 4:4:1 in the bios it will be right where it is supposed to be if you hit 133fsb. Even at 125fsb I would be using the 4:4:1 setting in fact I do on my bro's computer.
Originally posted by ol' man
If you set it too 4:4:1 in the bios it will be right where it is supposed to be if you hit 133fsb. Even at 125fsb I would be using the 4:4:1 setting in fact I do on my bro's computer.
I am running at 4:4:1 now and having no problems at all. What I am trying to find out is at 129FSB, what is my AGP bus at? Since there are no dividers in the bios, I have no idea what my AGP bus is at.
SwedeDude
01-06-02, 04:39 AM
Your AGP get (129/4)*2 = 64.5 Mhz
Up to 1564 130FSB at 1.75v. Been running Prime95 for 3 hours now and kept the heat turned down in the room today. Peak temps 34-35C. I think I'm at my limit for now. Tried 131 FSB even at 1.8v Prime 95 crashed after about 1/2 hour. I'll keep burning and try again but I don't think I'll be hitting 1600 with this chip.
Great overclock with the chip your pretty much close enough to 1600 consider it 1600 :D
Although go rough with the burn in and get CPUBurn that thing just puts crazy stress on and it and it'll speed up the process.
After a burn-in I hope your CPU hits 1600.
Good Luck.
Yodums
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.