HELP!! with my fridge/comp

[Default]

well i've got the temps lower now but i still don't like them!:mad:
i get 22C idle and 37C load with my 1.4 @ 1.6 @ 1.85 Vcore.
here is my setup thus far:

SK6 waterblock(no fins just twin tanks on the surface plate)
500GPH Buildge pump
coolest part of evaporator stuck in water tank:D
some flex tube
silver past

i'm stumped as to why my temps are still in the 20's:confused: help me get to sub zero temps:eek:

[AntmanMike]

if you were going to subzero temperatures the water would freeze. Then your pump would break. You cant get below 0degrees because the water freezes then. Also, as the water leaves the freezer, it warms up. There are many reasons, but unless you use anti freeze, your NOT going to get zubzero. What you could doo is put a water proof tray in teh freezer, fill it with anti freeze, put the radiator in it, put the evaporator tray on top of it. The anti freeze wont freeze, and the water will be cold. Dont forget to add some water wetter to your water.

[Tiger]

What is the coolant temp and what kind of behaviour of temps are you getting?

[The Overclocker]

er.. your water block is just a flat bit of copper?

i think that is your problem, look at a new block like the dangerden maze

[Default]

well i found one of my problems;) seams that a metal water tank doesn't hold in the cold very well:eek: guna shove it in a cooler once i get those new radeon drivers from the video forum and yes i'll add some rad fluid once i see that it is getting dangerously lower to the freezing mark. i won't untill then because rad fluid doesn't transpher heat too well.