View Full Version : Punch down blades
Ridenow
01-06-02, 04:04 PM
For Christmas Mom bought me a Belkin Impact Punch Down tool. Now it came with a 2 ended blade, 110 and 66, but both are the cutting blade. I want to buy a replacement blade, specfically the 110 blade that does not cut the wire. I have looked several places without finding even the cutting blade. Am I just blind? or are they not selling these? Now the frustrating part. On one of the websites they had a nice picture. Look at what blade is installed! I want that one!
Gresyth
01-06-02, 04:29 PM
go here (http://www.tscm.com/tools.html)
Punch Down Blades and Case
A set of Dracon 814 punch down blades and case is also a absolute requirement for any TSCM work.
Dracon 66, 630A, GTE, 110, 88, 814 and center punch bits are needed as a minimum. (Buy 2 extra 66 and 110 blades, and 3 storage cases).
or here (http://www.sellntell.com/tool1690.htm)
i did a Google search for "punch down blades" and got lots of hits.
BTW - What are they for?
Ridenow
01-06-02, 04:53 PM
Thanks, the second link looks close, I will have to find out if they will fit. The first one is a different brand and will not fit in my tool.
I have been looking at many sites and most have the tools, but no blades.
These tools are for connecting cables, like telephone and network(cat 5) cables, to patch panels and wiring blocks. I have a patch panel and am thinking of putting in a little network.
Gresyth
01-06-02, 05:01 PM
clear as mud....:D
have fun.
All of the punch down blades I have seen have the non cutting side on the opposite side of the cutting side on the single type bits. So if you get a 110 only not 110/66 punch down bit it should have both.
Ridenow
01-07-02, 01:31 PM
Originally posted by Shep
All of the punch down blades I have seen have the non cutting side on the opposite side of the cutting side on the single type bits. So if you get a 110 only not 110/66 punch down bit it should have both.
That agrees with the ones I have seen, but for some reason nobody sells the blades for the Belkin tool.
foxforcefive
01-10-02, 12:25 AM
Golly Gee Mom, a punch down tool...it's the thought that counts. LOL
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.