cel 1.0ghz

[happypierre101]

I wanted to know the voltage needed to overclock it. I was also wondering what a good maximum temp for the processor is. Thax for your help

[funnyperson1]

just start at default voltage and then rais the fsb, if it is unstable then raise the voltage, however keep any eye on the temps at all times......if it goes above 45-50 i would recommend lowering the voltage.....the max temp for that cpu air cooled would be 2.1 with a very good cooler....

[funnyperson1]

just start at default voltage and then rais the fsb, if it is unstable then raise the voltage, however keep any eye on the temps at all times......if it goes above 45-50 i would recommend lowering the voltage.....the max voltage for that cpu air cooled would be 2.1 with a very good cooler....

WELCOME TO THE FORUMS:cool:

[Yodums]

What FP1 said is right.

Use Prime 95 or CPUBurn to test stablity then raise the vcore a tad 0.5 by 0.5 until it becomes stable and you shouldn't raise it too high with a good cooler as it becomes to make more heat putting your chip in danger too.

Yodums