hhhmmm t/bird 1000/133

[tazman]

hi guys goit a problem built a cheapo system and the board for some reason dont like 133 fsb is the away of changing via the bridges the multiplier to *10 instead of *7.5

as this would give me the 1000 at 100 mhz

no option on mobo to change multiplier
but i can change the fsb between 100 and 133

hope some one can help

just thought could it be the power supply not beafy enough i have an unbranded 300watt running the system it also has a asus ti200 gf3 in it when running at 133 system locks could it really be the power supply

[Bull]

Do the pencil trick on the L1 bridges. Connect all 4 and make sure they dont touch each other. If you need more advice check the guides on the front of overclockers. it will tell you in detail then you can change the multiplier.

Be careful though.

[tazman]

only prob is the mobo is an ecs and theres no option for changing the multiplier in the bios

[bobt17]

what about jumpers or dipswitches on the board itself?

[praetor2k2]

new. pencil trick?

[praetor2k2]

how far can you push these with basic cooling?

[tazman]

theres no jumpers on the board only for clearing cmos

[Angry]

What chipset does your motherboard have?
Some mobos just dont have multi change..period.