Please help !!
Trying to assemble a system with the following components:
MB ABIT AB9 PRO P965 775
CPU INTEL|C2D E7200 2.53G 775 45N R
MEM 2GX2|A-DATA ADQVE1B16K R
PSU ROSEWILL|RV430-2-FRB-S 430W RT
VGA MSI NX8400GS-TD256EH 8400GS RT
DVD BURN SAMSUNG|SH-S203N SATA LS
HD 500G|ST 7K 16M SATA2 ST3500630AS
CHASSIS NORCO|RPC-800 BK R
I have not been able to get the system to boot. It gives me a c-1
post error. That's as far as it gets. I did no know what was happening so I tried to contact Abit by phone and e-mail with no
response.
I have reset the bios jumper, removed the battery and received the
same error. I replaced the memory with 1GBx2 kingston
KVR667D2N5K2/2g same erro. I ordered 1GBx2 Crucial DDR2 PC2-4200
UNBUFFERED memory with no change. This is the second ABIT AB9 PRO
motherboard I tried. I REM ed one because of the same situation.
This is not the first system I have assembled. I Assembled every
system I have used for the past 20 years without any real problem.
Please Help!!!
Trying to assemble a system with the following components:
MB ABIT AB9 PRO P965 775
CPU INTEL|C2D E7200 2.53G 775 45N R
MEM 2GX2|A-DATA ADQVE1B16K R
PSU ROSEWILL|RV430-2-FRB-S 430W RT
VGA MSI NX8400GS-TD256EH 8400GS RT
DVD BURN SAMSUNG|SH-S203N SATA LS
HD 500G|ST 7K 16M SATA2 ST3500630AS
CHASSIS NORCO|RPC-800 BK R
I have not been able to get the system to boot. It gives me a c-1
post error. That's as far as it gets. I did no know what was happening so I tried to contact Abit by phone and e-mail with no
response.
I have reset the bios jumper, removed the battery and received the
same error. I replaced the memory with 1GBx2 kingston
KVR667D2N5K2/2g same erro. I ordered 1GBx2 Crucial DDR2 PC2-4200
UNBUFFERED memory with no change. This is the second ABIT AB9 PRO
motherboard I tried. I REM ed one because of the same situation.
This is not the first system I have assembled. I Assembled every
system I have used for the past 20 years without any real problem.
Please Help!!!