If I close all L11 Bridges my voltage is 1.850?

[slick306]

I was wondering if I close all my L11 bridges my default voltage will be 1.850. Does this mean that in the bios I would be able to select 1.850 and actually have the chip at 1.950? Does it give me an extra .10 volts without doing the motherboard volt mod?

Slick

[mEKbOY]

yes..i did it to my MP's.

[slick306]

SO like now in the bios if I select 1.850v, my chip will acutally be running at 1.95 volts?

Slick

[AntiHeiss]

I have a KR7A-RAID, and I believe you are correct. But I am not sure. Have you tried to use an analysis program? Like WCPUID or one of the many out there? It may not show the correct value anyway, but its worth a try.

[mEKbOY]

Regardless of what your default voltage is on your chip your motherboard has a max voltage that can be put out without modifacation done to it. I have tried what your thinking which is setting the defualt on your chip to 1.85v and then putting your voltage to plus 1. It was still at 1.85v. Just do a voltage mod to your board and save yourself the time.

[LutaWicasa]

Right, some mobo's have an over volt protection set-up. Some boards this will be 1.85v and others 1.90v. Your best bet is try. If ya get what ya need....cool. If not...it's mod time :D