cable modem diag

[trapper]

can someone tell me if this is good or bad as i was reading something about signal to noise ratio so i been and tested the modem and heres the results..........

Downstream Value
Frequency 331000000 Hz Locked
Signal to Noise Ratio 34 dB
QAM 64
Network Access Control Object ON
Power Level 4 dBmV (The Downstream Power Level reading is a snapshot taken at the time this page was requested. Please Reload/Refresh this Page for a new reading)



Upstream Value
Channel ID 3
Frequency 29008000 Hz Ranged
Ranging Service ID 1961
Symbol Rate 1.280 Msym/s
Power Level 44 dBmV

i would be gratefull if a translator could put me right thanks again guys

[Kingslayer]

Looks like a Motorola Surfboard 4100 to me....

Your Signal to Noise is fine. It's better than mine and I'm pulling 2.3 Meg off a 1.5 Meg line.

The other important is the power level reading. It should be as close to 0 as possible and should never break 8. You have a 3 which is more than acceptable.

Looks good to me.

Are you having connection or speed problems or are you just curious about the readings?

[trapper]

yip got it nailed bro sb4100 i was having connection probs as the line back was apparantly iffy (not my side) so i been rockin for over a week now.......what a difference eh from diallup there is no justice!!!!!!!!!:burn: