Celeron 300

[The Coolest]

Hi guys, how do u think can a Celery 300A get upto? I understand the the A series are 100MHz FSB, right? so if mobo supports upto 133FSB then I can get it to MAX of 400?

[funnyperson1]

nope all Cellies up to 800 are 66fsb....so expect a limit of 600....450 is pretty much guaranteed 500 seems average....also its funny with your "No intel allowed avatar";)

[muddocktor]

The Celeron 300A runs on a 66 fsb. I had a deschutes P2 300 that also ran on a 66 fsb and the max I could overclock it was 450/100 fsb. I imagine that the 450-500 neighborhood is about the highest that you'll be able to get with that chip. Have fun and run the hell out of it.:D

[funnyperson1]

highest oc on air with this chip is 644, average is 475 according to cpu database....

[Max the Axe]

mine runs at 504MHz with a standard heatsink...
i stole it in the office where i work losing my obsene Cel433.
i like to own an overclock pioneer.;)

[nerd4life]

check out www.octools.com and to the left their supercooling section. in there first part of this, they submerged a 366a, i think, and go it to around 650...

[Yodums]

Some of OCTools projects are mainly fun and the one with liquid nitrogen, well probably with the price of the setup you could have gotten yourself a new chip altogether and a motherboard probably.

If you lap the retail fan and add some ASII and have good heat transfer and clean the fan fins off the heatsink and the dust. Heat won't be a problem in this case and you'll probably hit 500.

[deez]

most ran cele 300A's at 450 and not much higher b/c RAM used to be expensive especially the good stuff. But I think something like 85% of those chips hit 450