Few months back i got a p5e-d x48 cool Mb.
Flashed bios with a 410 so i could get all voltage sensors in bios.
P5e delux didnt even list mem voltage in bios.
Last Intel MB i had was a P3 815.
I cannot get perfomance level below 8.
Want to try to use a lower ratio like 333 but not at 1-1.
[How do you change mem fsb ratio from 1-1 to a lower ratio.]
At 1-1 MB is stable at 515. using crucial 533.
I have had fsb up 1100 using a divider but i cant remember how i did it.
Presently MB with a e8400e @4250 at 1.41v.
[What order would you set all cpu setting to end up wih lowest voltage.]
1 voltage
2 pll
3 fsb
4 gtl
5 n.b
Flashed bios with a 410 so i could get all voltage sensors in bios.
P5e delux didnt even list mem voltage in bios.
Last Intel MB i had was a P3 815.
I cannot get perfomance level below 8.
Want to try to use a lower ratio like 333 but not at 1-1.
[How do you change mem fsb ratio from 1-1 to a lower ratio.]
At 1-1 MB is stable at 515. using crucial 533.
I have had fsb up 1100 using a divider but i cant remember how i did it.
Presently MB with a e8400e @4250 at 1.41v.
[What order would you set all cpu setting to end up wih lowest voltage.]
1 voltage
2 pll
3 fsb
4 gtl
5 n.b
