my case mod....

[PYROMANIAC]

i've had this case since about july of 2001...im gonna be adding more stuff to it soon..tell me what you think of it..i love the pc-70
these are pics from yesterday(1-12-02) at my friends house..thats why its on the floor:) #8 is my personal fav

www.corpse-squadron.com/pyromaniac/pc1.jpg
www.corpse-squadron.com/pyromaniac/pc2.jpg
www.corpse-squadron.com/pyromaniac/pc3.jpg
www.corpse-squadron.com/pyromaniac/pc4.jpg
www.corpse-squadron.com/pyromaniac/pc5.jpg
www.corpse-squadron.com/pyromaniac/pc6.jpg
www.corpse-squadron.com/pyromaniac/pc7.jpg
www.corpse-squadron.com/pyromaniac/pc8.jpg

[Oni]

Very nice! But I'd clean up those wires a bit . . .

:beer:

[Element-Xero]

looks really nice, but you should clean up those wires! Zipties work wonders..

The Lian-Li cases look really awesome when they look clean and professional. Thats a professional-quality mod, now some professional wiring will give it that extra touch!


EDIT-
**beat me :(**

[touser]

Very nice! it looks identical to the one sitting right next to me :D, i see you also got the pc mods full tower window :), the pc-70 truly is an awesome case, i know i love mine!

[PYROMANIAC]

yes i love it..i had an inwin mid tower...no room...yea i've ordered some rounded cables to replace those so when i get water cooling it wont be a big mess....i've been thinking about putting another neon light at the top..someone at a LAN mentioned that to me as they were taking pics of my comp:D

[CrystalMethod]

I was gonan say clean up the wires a little, but you guys beat me to it.

[ColdMiser]

The next crazy mod you should make is to fashion a supportive structure, perhaps out of an exotic material like wood, on which to place that beautiful PC-70 so you don't have to lay on the floor to use the computer.

If you already have a "desk" (as I like to call them) and only set it up on the floor for photographing purposes, then you can cast my smart remarks into the Pit of Eternal Peril.

[BinarySuperman]

you should get those round IDE wires, im looking into it myself, plus im wondering, do you use ur computer on the floor?:D

[Darrenct]

What do you guys use to cover up the edges between plexiglass and metal... I want to put a window on my PC, but I have no Idea how you guys are mounting the plexiglass.
Also, what works best for cutting the plexiglass shapes?

[PYROMANIAC]

well its on the floor cuz its at my friends house...at my house..i've got 2 desks in an L formation and tons of stuff all over....
about the windows...the acrylic one i got from pcmods uses a rubber strip that you have to wedge in...they say it takes "couple of minutes" but it really takes 4 hours..if i got another window i'd op for gluing it behind the cut...making a bigger window than the hole and just gluing it behind or something...more secure that way...and yea i'm gettin some rounded IDE cables...blue ones actually :) it should all be clean soon with a water cooled system and a new mobo...wewt

[Mike K]

What can you use for molding if you make ur window yourself? I already cut the hole and have the plexi but I have no molding. I am looking for H molding that would fit over the panel and over the plexi
_________
_____ | _______
_____ | _______
|
________

Sort of like that, the panel on the left and the plexi on the right but it would be a better fit. I' m sure someone makes that but cant find a place that sells it. Does ne1 know where to get it. Also, PYROMANIAC what does the molding look like on your kit and how did you secure the plexi?

[Mike K]

My molding figure got messed up

[Darrenct]

Where did can you get an LCD temp monitor... and if you get one, how do you hook them up? Just wondering, because I saw the one on your PC pyro.

[phungilax]

Originally posted by PYROMANIAC
i've had this case since about july of 2001...im gonna be adding more stuff to it soon..tell me what you think of it..i love the pc-70
these are pics from yesterday(1-12-02) at my friends house..thats why its on the floor:) #8 is my personal fav

www.corpse-squadron.com/pyromaniac/pc1.jpg
www.corpse-squadron.com/pyromaniac/pc2.jpg
www.corpse-squadron.com/pyromaniac/pc3.jpg
www.corpse-squadron.com/pyromaniac/pc4.jpg
www.corpse-squadron.com/pyromaniac/pc5.jpg
www.corpse-squadron.com/pyromaniac/pc6.jpg
www.corpse-squadron.com/pyromaniac/pc7.jpg
www.corpse-squadron.com/pyromaniac/pc8.jpg

hey pyro that case of yours looks great. very professional and cool looking. i'm sure you take it to LAN parties to show it off. I love the newq. I always wanted to get one but haven't found a good place to pick one up. where'd you get yours?

[Oni]

Originally posted by Element-Xero
EDIT-
**beat me :(**

Na na!! :)

[PYROMANIAC]

Originally posted by PYROMANIAC
well its on the floor cuz its at my friends house...at my house..i've got 2 desks in an L formation and tons of stuff all over....
about the windows...the acrylic one i got from pcmods uses a rubber strip that you have to wedge in...they say it takes "couple of minutes" but it really takes 4 hours..if i got another window i'd op for gluing it behind the cut...making a bigger window than the hole and just gluing it behind or something...more secure that way...and yea i'm gettin some rounded IDE cables...blue ones actually :) it should all be clean soon with a water cooled system and a new mobo...wewt



i got a window kit with the case and it came with some rubber stuff and a locking strip that you put in on the back...might wanna check www.pcmods.com or some other places for the locking strips or moldings

[PYROMANIAC]

Originally posted by Darrenct
Where did can you get an LCD temp monitor... and if you get one, how do you hook them up? Just wondering, because I saw the one on your PC pyro.


i got it from frys electronics...its called the compu nerse

its got a flat temp probe that you put in between the CPU and the HSF where it touches the die but its not over it..its kinda hard to place it where it gets the right readings..i just did it until it got the same readings as my mobo..this http://www.pcmods.com/details.asp?ProdID=220
is just 2 of mine put together in a fixture...you can buy them separate but i cant remember where...unless your loacl electronics stores have them

[PYROMANIAC]

Originally posted by phungilax


hey pyro that case of yours looks great. very professional and cool looking. i'm sure you take it to LAN parties to show it off. I love the newq. I always wanted to get one but haven't found a good place to pick one up. where'd you get yours?

i got mine at compusa
the website is www.newq.com mine is the newq platinum

[Kingslayer]

Wow, thats original. How the heck did you get your computer to look like a 404 error? :)

[PYROMANIAC]

Originally posted by Kingslayer
Wow, thats original. How the heck did you get your computer to look like a 404 error? :)

clanpages is a welfare domain host and the site is down right now:)

try later it should work

[dreadlord79]

Hey Darrenct, here is a site that has a few choices for tmep monitoring products:
http://www.crazypc.com/products/cooling/cooling.htm#thermalsensors

Hope this helps. :)

[WyrmMaster]

Looks nice, i like the compunurse on the keyboard, unique idea. You shoud also cut out the factory fan airflow blockers anc replace them with wire guards. The wires need some help too...

[PYROMANIAC]

sounds like a good idea...yea my wires are even more a mess now b/c i slapped in a new mobo...im gettin some rounded ide cables soon so it wont be so messy:D