I have built a system for a friend and am trying to maximize a stable OC at the lowest vcore possible. I know the playing with the GTL ref and FSB termination voltage is important in OCing C2Qs but how important is it with the duals?
I am currently at 9x400 Prime stable with 1.385/1.352vcore (bios/load)on the E7200/Artic 7 Pro with temps 33c/50c idle/load. Ram is 2gb of G.Skill PC6400 5-5-5-15 and has run fine at 500mhz. PLL and FSB termination voltage is on auto and I was wondering if anyone had some bios suggestions for this.
I am currently at 9x400 Prime stable with 1.385/1.352vcore (bios/load)on the E7200/Artic 7 Pro with temps 33c/50c idle/load. Ram is 2gb of G.Skill PC6400 5-5-5-15 and has run fine at 500mhz. PLL and FSB termination voltage is on auto and I was wondering if anyone had some bios suggestions for this.
Last edited: