Duron 950 voltage

[Stupotaso]

I have a ? about voltage setting on asus A7V133A MBO
Set at 4.50 core volts Ext clock at 107MHz
What is best way to overclock volt or Ext clock speed with out frying CPU. CPu is ANCA D950AUT1B
CPU TEMP 48c

[Stupotaso]

Sorry core voltage is 1.6 volts

[Kendle666]

okay, since I'm not familiar with the asus board ...............1, is the duron unlocked. 2, what is the FBS you are running and 3, the Duron will run greater voltages ...............highest stock voltage ya can get on MoBO's is 1.85 with out modding it ...............I have a duron 1 Ghz OC'ed to 1.2 Ghz (9x133) running at 1.7 volts .................

[The Coolest]

I have two mobo's that are just as urs, And I LOVE 'EM!
They are very O/Cer friendly & have a fail boot recovery! I heard Abit have it also. Its max volts are 1.85V wich is really about 1.9V.
What are u using ? The jumpermode or JumperLess mode? What are the pecs of ur RAM is it a PC-100 or PC-133? What is the FSB ur running the duron at. What is your heatsink and temps. U can up the Vcore as high as u want even to the MAX only watch the temps so they won't go above 50C° full load

Good luck & WELCOME TO THE FORUMS

[Stupotaso]

Thanks COOLEST
I am using jumperles mode , ram PC 133 Mother board temps off bois is running 46 48c . FSB is @ 110. Mother board monitor is off by 10c reading 57c I am going to up FSB tonight see how high it will go.

[Stupotaso]

Sorry for repost getting use to how posting works, here are my specs: