I Did It! 1.6@1.8v

[NovaCX12]

Well, after some help and some patience waiting for posts. I finally did it. I simply took a thin wire and wrapped it around the 2 pins and just twisted it tight with some pliers. Popped it back in adjusted voltage to 1.8 and 133fsb, and timings to 4-3-1. Seems happy. I noticed that my Quake 3 Loops are working instead of locking up. OMG..im so happy. I would like to thank the people who posted that have helped me out. THANKS! :D I do notice a just in temperature @ idle 32c, compared to about 20-22C @ 1.6V, is that a safe temp?

Ok..on another note...im gonna try a 140fsb and get greedy. Results will follow. Thanks again for all your help

[soil]

:D looks like you need to update your sig.:D

[Bonka]

Those temps are very good.

Great OC!

:)

[NovaCX12]

Here is a link to my cooling setup:

http://forums.overclockers.ws/vb/showthread.php?s=&threadid=58652

[Sempei]

Originally posted by NovaCX12
Popped it back in adjusted voltage to 1.8 and 133fsb, and timings to 4-3-1. Seems happy.
You really should be running 4:4:1. At 4:3:1 your PC133 memory is only running at 100. Bump it up to 4:4:1 to get your memory back to 133.