mod

[Silver arrow]

OK first of all I have:
MSI 694T PRO mobo and
Celeron 700

As high as I can go is:
1.8v and
97MHz FSB

As far as I know you can go higher (in both cases) with a mod. Can anyone post some links to a how-to that would tell you how to do this mods... with pics if possible.

thanks

[Yodums]

So your at basically 100fsb in your case?

1050 speed?

Well there is no modding in this case.

To go further probably water cooling or extreme air cooling as your coming to a maximum of the chip.

Yodums

[Silver arrow]

No no no no no.

Im at 66FSB and 1.7v ==> 700 MHz.

Before this modo I had abit BH6. I was running the chip at 100FSB - Thats 1050MHz, but I needed 2.1v for it.


NOW I have 694T PRO and the max. voltage is 1.8v but I need to go up to 2.1v.

PLUS I have a FSB maximum of 97! I want it at 100!

And don't worry about heat I have watercooling.

[Silver arrow]

Hmm... If you look at this:
http://www.overclockers.com/tips630/index02.asp

I need to connect VID1 & VID2 to get 2.0v default? Is this right?
Also how do I know if my CPU is cC0 stepping??

[jazztrumpet216]

Looks like you're right on with the volt mod.

As far as the cCo stepping... if you know the step code of your processor, this (http://support.intel.com/support/processors/sspec/icp.htm) will help you. Looks like if you have SL4P2 or SL4P8 you're set.

[Silver arrow]

OK now that I know which CPU I have I'll look up some guides... But how do I get past the 97 FSB limit? Today I ran softFSB and I could get all the way to 133 if I wanted to (of course with 1.8v I can only go as high as 85 until it gets unstable). So whats the point of those stupid bios limits????