Waterblock idea

[Strangelove]

Here is an idea I came up with. Basically it takes one of Petar's designs .link (http://www.overclockers.com/tips793/index03.asp) (a very good read! :D) and adds a bit to it. Let me know what you think, I'll see if I can have one up and running within a week or two :burn:

[Strangelove]

get the idea??

[Diggrr]

Kewl, can't hurt to have some backup!

[Yodums]

Looks good, just make sure you test for leaks and stuff :D

Yodums

[Strangelove]

The idea was to mount a 50X50mm fan on top of it. Since it will be made from all one piece of copper it should conduct heat nicely ;)

[Yodums]

Originally posted by Strangelove
The idea was to mount a 50X50mm fan on top of it. Since it will be made from all one piece of copper it should conduct heat nicely ;)

I don't know if thats a good idea since the water temperature should run very close to ambient temperatures or less and you maybe sucking in hot air towards it.

Yodums

[Strangelove]

Originally posted by Yodums


I don't know if thats a good idea since the water temperature should run very close to ambient temperatures or less and you maybe sucking in hot air towards it.

Yodums

You might be right but this will be mounted in a case with very (read VERY) heavy ventilation so I doubt It'll be a problem, we will see when I get it made.