PDA

View Full Version : 60mm YS Tech 26cfm dead already?


stymee
01-19-02, 01:19 AM
I've had my VOS32 since November and one of the YS Tech fans is starting to sound a little funny.

It almost sounds like one of the blades is scraping the housing. I took it out and cleaned off the dust, and checked the blades, they all clear the housing fine. I couldn't get it to make the noise by turning it by hand, so I blew compressed air on it to spin it up. Oddly enough, it only makes the noise spinning in one direction (the normal operating direction). The noise is quite irritating, and it has to be loud if I can hear it over all of the case fans I got buzzing in there.

Since I'm still kinda new to all this, I'd thought I'd throw this out there in case anyone has a quick fix. I would have hoped that the fan would last longer than 3 months.

Also, any recommendations for replacements if it's just crapped out? Maybe something in the 30-34 cfm range?:beer:

JetMech
01-19-02, 05:37 AM
s


Check out www.inflowdirect.com

Zazuk
01-19-02, 10:10 AM
Time for a new fan.:(

stymee
01-19-02, 01:26 PM
I'm looking at 2 Papst 33cfm's. From what I hear, not as loud as a delta but still plenty strong.

Yodums
01-19-02, 04:02 PM
Faulty fan, could be the bearings being worn out.

Yodums

ButcherUK
01-19-02, 08:58 PM
All my YS-TECH 60s work fine (ok all 2 of them ;)), however one of my YS-TECH 120s had the bearings go after maybe 100 hours of useage tops, stiull runs just makes a really loud rattling.