tricky question

[nicky.82uk]

tricky question i want to run 1 Feser X-Changer QUAD 480 Extreme Performance Radiator and 2 DD12V-D5 Pump Variable Speed by Laing

also with these blocks able to do ???

1 cpu + NB and SB + 2 Mosfets + 295GX + 2 pumps + 1 rad + RAM cooler 1 res

[Spawn-Inc]

and you question is?


you will be wasting money and flow rates, even with dual pumps, and there is no need to cool the ram that much. koolance also uses aluminum in their ram block.

unless your worried about a pump dieing then 1 of those pumps will handle what your asking.

this is in the wrong locations, should be in water cooling. ask a mod to move it for you.

if you plan to overclock there is to much heat in that loop. i think you could get away with stock clocks with a quad otherwise a dual and triple and 2 loops if you going with 2 pumps is best.

[nicky.82uk]

i was thinking two loops also now Koolance was aluminum now back to copper so many times had this debate

[Spawn-Inc]

2 loops with 1 rad?
not a good idea splitting loops.

i would just go with 2 loops, makes it less complicated and better temps.

[nicky.82uk]

yea but it's QUAD ? but i'm not sure anyway because had so much advice from so many guys i'm so lost and already paid for everything:cry:

[Spawn-Inc]

for your cpu it will be to hot with a single 120mm rad, with a double it will give you nice stock temps or decent temps with overclocking, with a triple 120mm it will give you great oc and good temps.

with your video card thats 2x the heat dump and need at least a double 120mm rad.

plus you want to add mosfet, nb and sb. that is at least a single 120mm rad.

add it up a double and triple at least, for the money you would spend on a quad feser i would get 2x Swiftech MCR320 rads and run gpu and n/b and s/b. then cpu and mosfets on second.

[nicky.82uk]

yea but everything been paid for now

[teddythetwig]

Unfortunately all I can think of is to try and return what you don't need for credit to buy what you do need.

[nicky.82uk]

so all i need is 1 more rad 4 more fans should be okay with one res right just clear this up

[Spawn-Inc]

o, i didn't know you had all the stuff. in that case return the ram blocks forsure and try it all in one loop, you can always order a MCR220 or what ever rad you want later on.

[nicky.82uk]

i'm spent $2000 so its okay about the money side of it

here a look at my list its only going to cost me like 300 more then this is all done

Koolance 62 Line items $831.49
1/Aquaero 4.00 USB Fan-Controller, black/white $104.95
1/Black Faceplate for Aquaero $7.50
2 Aqua Computer Poweradjust USB (with mounting kit) $99.90
1/Aquatube G1/4 Delrin black with fittings $49.95
1/Black Faceplate for Aquatube $13.95
1/ aquabay AT (installation bay for aquatube ? $23.95
2/ UN Designs Z-Bracket for 3G or Absolute Pump Brackets $ 25.00
5/ Blacknoise Noiseblocker Multiframe S-Series M12-S1 34.1 CFM $114.75
1/ Logisys Dual White 12in. CCFL Light kit $ 6.95
1/ Noise Isolator PSU Vibration Dampener Kit - Black $ 4.95
1/ Noise Isolator 3.5" Hard Drive Silicon Rubber Protective Skin $5.95
2/ Hard Drive Vibration Absorber for 3.5in. Drives $ 10.00
2/ SATA II Cable Black 24" 180 to 90 degree connector $6.50
1 / TIM-Consultants - T-C Grease™ 0098 Thermal Interface Material $4.99
1 / Floppy Black 18" $3.95
1/ Bitspower Rad Support $10.95
1/ Swiftech MCB-120 Rev 2 Radbox Radiator/fan housing - Black $15.95
2 / Feser One F1 Cooling Fluid - UV Black - 1 Liter
1/ Lian li 5.25 inch Black Dvd Rom front cover
3/ Lian li 5.95 Color = Black Mesh cover
2/ DD12V-D5 Pump Variable Speed by Laing
1 /Feser X-Changer QUAD 480 Extreme Performance Radiator
2/A.C. Ryan AcrylPanel 3mm 480x480mm Black
Black Heatshrink 1/2 inch - 5 foot $ 2.45
Custom Cut Length 3/8 Expandable Sleeving - 10 foot $5.50
Tygon R3603 7/16 x 5/8" AAC00033 16 foot $32.00 plus 12 i've already got

also the Koolance Blocks are as followed

2/ VID-NX295
6/ RAM-35,
1 CHC-120-V06
1 CHC-122
1 CPU-340
2 MVR-40

[teddythetwig]

I want to see the computer with all of that in/on it.

[nicky.82uk]

lol i'm sure you do

[nicky.82uk]

i was just thinking better be safe get a Bitspower 3.5in. Bay Res - Black Acetal (POM) - BP-WT350P-BK what the hell i will get this http://shop.aquacomputer.de/product_info.php?products_id=1256

[teddythetwig]

i was just thinking better be safe get a Bitspower 3.5in. Bay Res - Black Acetal (POM) - BP-WT350P-BK what the hell i will get this http://shop.aquacomputer.de/product_info.php?products_id=1256

For a backup res? That seems like a little bit of overkill to me and will just complicate the routing of the tubing.

[Spawn-Inc]

i'm not sure who told you to get koolance blocks but you will need anti corrosion coolant, which feser is not. you are mixing metals which is not a good idea.

i was just thinking better be safe get a Bitspower 3.5in. Bay Res - Black Acetal (POM) - BP-WT350P-BK what the hell i will get this http://shop.aquacomputer.de/product_info.php?products_id=1256


not a good idea, its aluminum, but your already mixing it so what the hell.

[nicky.82uk]

just looking on the back of the bottel it states ready to use anti corrosion coolant plus i have 1 small bottel of Feser baser corrosion blocker

[Spawn-Inc]

oops, i thought it was feser view (just dye) and not feser one which will help SLOW the corrosion that is going to happen.

[g0dM@n]

Moved to the Water Cooling section.

g0dM@n
OCForums Moderator

[Conumdrum]

My goodness. Lets cut your list down to the parts we need to know about.

CPU
Mobo
GPU
What else you want to watercool beside the above items
Case
Watercooling parts you chose on a whim with no idea what is needed

The rest we don't care about at all.
.................................................. ........

Cooling parts is all about

What you want to cool
What parts to cool and your planned overclock
Your planned watercooling loop
And what you want to mount it in

I really don't need to know what size screw you plan to put in the left uppermost hole....

[nicky.82uk]

also them bottel's cost me $40 for 2

so right so i will order these extra bits

1/ Feser X-Changer QUAD 480 Extreme Performance Radiato

4 more Blacknoise Noiseblocker Multiframe S-Series M12-S2 51.2 CFM

1/ aquabox 5 1/4" schwarz with fittings

[nicky.82uk]

so lets cut this down now

2/ VID-NX295
6/ RAM-35,
1 CHC-120-V06
1 CHC-122
1 CPU-340
2 MVR-40

2 x /Feser X-Changer QUAD 480 Extreme Performance Radiator
2/ DD12V-D5 Pump Variable Speed by Laing
1/ aquabox 5 1/4" schwarz with fittings
1 Aquatube G1/4 Delrin black with fittings

so done right and sorry about all these post i've been give so much poor advice when ordering this i feel a right noob now

[Conumdrum]

Wow what is a 1 CHC-120-V06? No clue.
1/ aquabox 5 1/4" schwarz with fittings......................... All I know about a schwarz is the movie Blazing Saddles. What is that?

What CPU? What GPU?

I7 920 no overclock, well maybe a bit?
GTX 280 and I wanna overclock to the max?

We'll try to help.

These are the basics we have to know.
CPU
Mobo
GPU
What else you want to watercool beside the above items
Case
Budget

The rest we don't care about at all.
.................................................. ........

Cooling parts is all about

What you want to cool
What parts to cool and your planned overclock
Your planned watercooling loop
And what you want to mount it in

[nicky.82uk]

Nth http://www.koolance.com/water-coolin...product_id=393
sth http://www.koolance.com/water-cooling/product_info.php?product_id=393
cpu http://www.koolance.com/water-cooling/product_info.php?product_id=664
gpu http://www.koolance.com/water-cooling/product_info.php?product_id=778
ram http://www.koolance.com/water-cooling/product_info.php?product_id=627
MOSFET http://www.koolance.com/water-cooling/product_info.php?product_id=660


then thats me i'm done thats the whole computer $5000 set up
http://i306.photobucket.com/albums/nn256/nicky_82/DSCF7221.jpg

http://i306.photobucket.com/albums/nn256/nicky_82/DSCF7218.jpg

http://i306.photobucket.com/albums/nn256/nicky_82/DSCF7216.jpg

[Conumdrum]

I'm not going to click on a bunch of links. Without saying what they are and part numbers etc.

TELL ME THE BASICS

What do you want to cool.

What CPU? What GPU?

I7 920 no overclock, well maybe a bit?
GTX 280 and I wanna overclock to the max?

We'll try to help.

These are the basics we have to know.
CPU
Mobo
GPU
What else you want to watercool beside the above items
Case
Budget

The rest we don't care about at all.
.................................................. ........

Cooling parts is all about

What you want to cool
What parts to cool and your planned overclock
Your planned watercooling loop
And what you want to mount it in

[nicky.82uk]

i will overclock everything and will do a full water kit meaning everything
Nth http://www.koolance.com/water-coolin...product_id=393
sth http://www.koolance.com/water-coolin...product_id=393
cpu http://www.koolance.com/water-coolin...product_id=664
gpu http://www.koolance.com/water-coolin...product_id=778
ram http://www.koolance.com/water-coolin...product_id=627
MOSFET http://www.koolance.com/water-coolin...product_id=660

[Conumdrum]

Aha, The GPU card block is okay, some have it in the WC world and seem to be happy with it. I prefer Danger Den myself.

Your CPU block choice really needs improvement. Keep up the hard work. Hints to look at the companies Swiftech, D-Tek, Danger Den.

Hose size? Clamps? Res? Mebbe a pump?

[Conumdrum]

deleted

[maxfly]

why are you buying koolance gear? btw your links are dead.

[Spawn-Inc]

honestly i would return all the koolance blocks accept the gpu since you already have them.


replace the cpu block for a Swiftech GTZ with I7 adaptor

replace the n/b block with a swiftech MCW30 or a ek block or a danger den block.

replace s/b with the same as above (mcw 30, etc, etc)

don't cool your ram with water, air is plenty

and the mosfets are fine as they are all copper.