GSKILL F2-8800CL5D + ASUS Rampage Formula

F2-8800CL5D + ASUS Rampage Formula

First, sorry for my English.

My computer is:
Rampage Formula + Q9550 + GSKILL F2-8800CL5.

I tried to configure the memories 1066 and 1100 and do not work, I get a lot of bugs in Windows, applications are closed ..

My BIOS settings:

CPU Ratio: 8.5
C1E: DISABLED
CPU TM: ENABLED
Vanderpool: Enabled
Execute Disable Bit: ENABLED
Max CPUID: Disabled
SpeedStep: Disabled

Extreme Tweaker


FSB Strap to North Bridge: AUTO
FSB Frequency: 367
PCIE Frequency: 100

DRAM Frequency: DDR2-1104MHz
DRAM Command Rate: 2N
DRAM CLK SKEWES A and Channel B: Auto
DRAM Timing Control: Manual
CAS latency: 5
RAS to CAS delay: 5
RAS PRE Time: 5
RAS ACT Time: 15
DRAM Static Read Control: Disabled
Ai Clock Twister: Auto
Ai Transaction Booster: AUTO or Manual and test levels.

CPU Voltage: VID
CPU PLL Voltage: 1.50v
North Bridge Voltage: 1.25V
DRAM Voltage: 1.8V - 1.9V (GSKILL)
FSB Termination Voltage: AUTO / 1.50 (GSKILL Recommended)
South Bridge Voltage: 1.05V
SB 1.5V Voltage: 1.50v
Loadlin Calibration: Enabled
CPU GTL: Auto
NB GTL: Auto
DRAM * REF: Auto
CPU & PCIE Spread Spectrum: Disabled

Thank you very much

try changeing your performance level to 6 and see what happens

How many sticks are you using? May be worth considering bumping up the NB for a try - to 1.3-1.35V

freeagent said:

try changeing your performance level to 6 and see what happens

Click to expand...

If, as I have proven this, 6 and 7

Badbonji said:

How many sticks are you using? May be worth considering bumping up the NB for a try - to 1.3-1.35V

Click to expand...

I have not proven this, always wear to a minimum.


thank you very much to both.