- Joined
- Feb 18, 2002
It took me a while to figure this out. For system below, memtest starts spitting out multiple errors within 10 minutes.
I test one stick and I test the other but for an hour each all's well, I test them together next to each other all's well again. Only when I run them in dual channel in 1st and 3rd slot, that's when memtest lights up red.
But if I run the sticks in DIMM 2 and DIMM 3 and leave DIMM 1 empty - no problem.
_____________________
AMD Athlon XP 2500+ AXMH 2500 FQQ4C
IQYHA 0348 SPMW
2 x 512MB Centon PC3200 (Samsung chips) @ 9 4 4 3
[200] FSB x 12.5 = 2500 MHz @ 1.87 Vcore with memory frequency at 100% [200 FSB] @ 2.90 Vdimm and 1.6 Vdd
nForce2 Epox 8RDA3+ v2.1, BIOS 07/29/2004
Thermalright SLK-900A with 80x38mm Delta EFB0812HHE fan
GeForce 6800; Antec SX-835II case ; 500W OCZ StealthXStream OCZ500SXS
Five 80x25mm Case Fans
I test one stick and I test the other but for an hour each all's well, I test them together next to each other all's well again. Only when I run them in dual channel in 1st and 3rd slot, that's when memtest lights up red.
But if I run the sticks in DIMM 2 and DIMM 3 and leave DIMM 1 empty - no problem.
_____________________
AMD Athlon XP 2500+ AXMH 2500 FQQ4C
IQYHA 0348 SPMW
2 x 512MB Centon PC3200 (Samsung chips) @ 9 4 4 3
[200] FSB x 12.5 = 2500 MHz @ 1.87 Vcore with memory frequency at 100% [200 FSB] @ 2.90 Vdimm and 1.6 Vdd
nForce2 Epox 8RDA3+ v2.1, BIOS 07/29/2004
Thermalright SLK-900A with 80x38mm Delta EFB0812HHE fan
GeForce 6800; Antec SX-835II case ; 500W OCZ StealthXStream OCZ500SXS
Five 80x25mm Case Fans