- Joined
- May 15, 2005
- Location
- French Mountains
hi'
I recentrly changed mobo for an Asus P5Q3, loaded with 6gb ram OCZ platinium pc3 12800.
I first run it at stock, and a little time after I began to push it a bit, up to 2.7, 300x9, stock vcore volt and the rest on auto.
VID of cpu is 1.3250
then tried a 3ghz with 333x9 @ 1.3250v, ram 7.6.6.20 @ 1.80v, fsb term : 1.28v
and NB at : 1.38v, leaving the SB alone as well as all the cpu ppl and gtl,
tunred off, all cpu spec such as mentionned for oc.
turned off load line calibration.
the system is satble, but on cold boot, it starts1/2 and restart for good,
what could it be?
and what could I do to get it even faster that what it is today?
any help very welcome
i686
I recentrly changed mobo for an Asus P5Q3, loaded with 6gb ram OCZ platinium pc3 12800.
I first run it at stock, and a little time after I began to push it a bit, up to 2.7, 300x9, stock vcore volt and the rest on auto.
VID of cpu is 1.3250
then tried a 3ghz with 333x9 @ 1.3250v, ram 7.6.6.20 @ 1.80v, fsb term : 1.28v
and NB at : 1.38v, leaving the SB alone as well as all the cpu ppl and gtl,
tunred off, all cpu spec such as mentionned for oc.
turned off load line calibration.
the system is satble, but on cold boot, it starts1/2 and restart for good,
what could it be?
and what could I do to get it even faster that what it is today?
any help very welcome
i686