Piv 1500@1650

[Haiklamix]

1.5 pIV -geforce2 - p4t - 256mb samsung - hda 40Gb - hdb 20Gb - cdrom - hdc 3Gb - pci mas stor device dvd + cdrw - soundcard pci128 - 10/100. when i put my fsb higher my pc doesn't start. when i had an tnt2 m64 and an 1400 i couldt go to 122fsb but now i cant get any higher then 110-"115?". what causes this is it the geforce2? or is the 1.5 a cpu that cant be oc well but when i look at other readings i see that it could easily raise 1830 at 122fsb what is the problem??
anyone an idea??

[batboy]

Most GF2 vid cards overclock quite well. You might try improving cooling a little and give it a slight voltage increase. Most of those P-4 1.5 gig ought to do at least 1.8 to 1.9 gig or better.

[Haiklamix]

that is what wonders me
with my first vgacard i could get high fsb
the only thing that has been changed to my first rig to my 2 rig is that my cpu and an other retail cooler?
but i tested it a bit and i think it is the geforce that gives the problem because when i start it up at 122fsb it boots but gives no screenoutput
any ideas

[Grande Juan]

Are you doing any kind of burn in? Or are you going straight for the 122FSB? What are your temps? Cooling could be a problem too.

[batboy]

Reinstall the heatsink using a good thermal paste. Maybe the heatsink is not getting a good contact with the CPU core.

[Yodums]

Video cards shouldn't have a problem unless over 100 AGPBus.

Your thing probably won't post any higher without no more voltage. Is it a 423 pin or 478 pin? Try upping the voltage a tad but remember to keep an eye on cooling.

Yodums