- Joined
- Apr 26, 2009
Hello after many years of of not understanding jack about overclocking and a couple of months with new computer and ram mem that not wanted to work in labeled speed i have had enough so i spent some hours reading around and finaly got it to work but now i want more ;D ... hehe
my set up is
mobo: asus p5q3 deluze wifi@n
cpu: intel core 2 quad q9550 2.83ghz
mem: crucial ballistix ddr3 1600mhz 4x1gb (8-8-8-24 1600mhz is labeled speccs)
and this is how my setup that is working looks like atm
____________________________
Ai OVerclocking Tuner : [Manual]
CPU Ratio Setting : [8.0]
FSB Frequency : [400]
PCIE Frequency : [100]
FSB Strap to North Bridge: [Auto]
DRAM Frequency : [DDR3-1601MHz]
Dram CLK Skew on Channel A1 : [Auto]
Dram CLK Skew on Channel A2 : [Auto]
Dram CLK Skew on Channel B1 : [Auto]
Dram CLK Skew on Channel B2 : [Auto]
Dram TIming COntrol : [Manual]
1st Information: 9-8-8-27-5-88-10-5
CAS# Latency : [9 Dram Clocks]
DRAM RAS# to CAS #Delay : [8 Dram Clocks]
DRAM RAS# Precharge : [8 Dram Clocks]
DRAM RAS# Activate to Precha : [27 Dram Clocks]
RAS# to RAS# Delay : [Auto]
Row Refresh Cycle Time: [Auto]
Write Recovery Time : [Auto]
Read to Precharge Time : [Auto]
Sec. Information:
Read to Write Delay (S/D) : [Auto]
Write to Read Delay (S) : [Auto]
Write to Read Delay (D) : [Auto]
Read to Read Delay (S) : [Auto]
Read to Read Delay (D) : [Auto]
Write to Write Delay (S) : [Auto]
Write to Write Delay (D) : [Auto]
third Information:
WRITE to PRE delay : [Auto]
READ to PRE delay : [Auto]
PRE to PRE delay : [Auto]
ALL PRE to ACT delay : [Auto]
ALL PRE to RED Delay : [Auto]
DRAM Static Read Control : [Auto]
DRAM Dynamic Write Control: [Auto]
DRAM Read Training: [Auto]
DRAM Write Training: [Ato]
MEM. OC Charger [Auto]
Ai Clock Twister: [Auto]
Ai Transaction Booster: [Auto]
**** Please key in voltage numbers directly! ****
CPU Voltage [Auto]
CPU GTL Voltage Reference(0/2) [Auto]
CPU GTL Voltage Reference(1/3) [Auto]
CPU PLL Voltage [Auto]
FSB Termination Voltage [Auto]
DRAM Voltage [1.90]
NB Voltage [1.26]
NB GTL Reference [Auto]
SB Voltage [Auto]
PCIE SATA Voltage [Auto]
**************************************************
Load-Line Calibration [Auto]
CPU Spread Spectrum [Auto]
PCIE Spread Spectrum [Auto]
CPU Clock Skew [Auto]
NB Clock Skew [Auto]
CPU Margin Enhancement [Optimized]
and the reason im posting about it is that i whould be glad if some one could help me make some change for the better caouse i feel a bit insecure when handling the vcore for cpu and so on,
but the memories should be able to handle alot more if you believe in this test.
http://www.legitreviews.com/article/600/8/
so my goal whould be to get so much mhz and as little cl as possible.
so pls if you se anything you whould change or anything pls post a reply
best reggards mathias
my set up is
mobo: asus p5q3 deluze wifi@n
cpu: intel core 2 quad q9550 2.83ghz
mem: crucial ballistix ddr3 1600mhz 4x1gb (8-8-8-24 1600mhz is labeled speccs)
and this is how my setup that is working looks like atm
____________________________
Ai OVerclocking Tuner : [Manual]
CPU Ratio Setting : [8.0]
FSB Frequency : [400]
PCIE Frequency : [100]
FSB Strap to North Bridge: [Auto]
DRAM Frequency : [DDR3-1601MHz]
Dram CLK Skew on Channel A1 : [Auto]
Dram CLK Skew on Channel A2 : [Auto]
Dram CLK Skew on Channel B1 : [Auto]
Dram CLK Skew on Channel B2 : [Auto]
Dram TIming COntrol : [Manual]
1st Information: 9-8-8-27-5-88-10-5
CAS# Latency : [9 Dram Clocks]
DRAM RAS# to CAS #Delay : [8 Dram Clocks]
DRAM RAS# Precharge : [8 Dram Clocks]
DRAM RAS# Activate to Precha : [27 Dram Clocks]
RAS# to RAS# Delay : [Auto]
Row Refresh Cycle Time: [Auto]
Write Recovery Time : [Auto]
Read to Precharge Time : [Auto]
Sec. Information:
Read to Write Delay (S/D) : [Auto]
Write to Read Delay (S) : [Auto]
Write to Read Delay (D) : [Auto]
Read to Read Delay (S) : [Auto]
Read to Read Delay (D) : [Auto]
Write to Write Delay (S) : [Auto]
Write to Write Delay (D) : [Auto]
third Information:
WRITE to PRE delay : [Auto]
READ to PRE delay : [Auto]
PRE to PRE delay : [Auto]
ALL PRE to ACT delay : [Auto]
ALL PRE to RED Delay : [Auto]
DRAM Static Read Control : [Auto]
DRAM Dynamic Write Control: [Auto]
DRAM Read Training: [Auto]
DRAM Write Training: [Ato]
MEM. OC Charger [Auto]
Ai Clock Twister: [Auto]
Ai Transaction Booster: [Auto]
**** Please key in voltage numbers directly! ****
CPU Voltage [Auto]
CPU GTL Voltage Reference(0/2) [Auto]
CPU GTL Voltage Reference(1/3) [Auto]
CPU PLL Voltage [Auto]
FSB Termination Voltage [Auto]
DRAM Voltage [1.90]
NB Voltage [1.26]
NB GTL Reference [Auto]
SB Voltage [Auto]
PCIE SATA Voltage [Auto]
**************************************************
Load-Line Calibration [Auto]
CPU Spread Spectrum [Auto]
PCIE Spread Spectrum [Auto]
CPU Clock Skew [Auto]
NB Clock Skew [Auto]
CPU Margin Enhancement [Optimized]
and the reason im posting about it is that i whould be glad if some one could help me make some change for the better caouse i feel a bit insecure when handling the vcore for cpu and so on,
but the memories should be able to handle alot more if you believe in this test.
http://www.legitreviews.com/article/600/8/
so my goal whould be to get so much mhz and as little cl as possible.
so pls if you se anything you whould change or anything pls post a reply
best reggards mathias
