Is one of my pins crossed on this unlock?

[SuperFLyJimmy]

I unlocked my XP1900 and i can adjust to 12, 12.5, 11.5,11, but when I go to 10,10.5 it goes to 12. Is this normal or did I unlock it wrong? I don't use the 10 or 10.5 but I was just playing with the FSB seeing how high it would go with the CPU staying at 1600Mhz and I adjusted it to 10.5x155 and it showd 1850 which should have beed around 1600. I found it odd that the others work. Enlighten me on my mistake here.
Thanks

[Big Mike]

It's probably not crossed just not making good contact, if your L1s arent right certain multipliers dont work the way you'd expect them to. You definately have a problem of some sort in your unlock job though.

[FRANK]

As posted by BigMike, this problem has been reported in many threads on many forums. It appears to be a common problem that is usually remedied by re-doing the locking process.

Use a bright light, magnifying glass and take your time. After finishing the job, examine the bridges through the magnifying glass from all angles to insure that you've got them all.

Good Luck!

[Morbid]

If you crossed bridges you'd notice. I believe if you corss two bridges it fries the CPU... then again I could be mistaken.