hello all. i just bought a new rig and i have 4 2gb sticks of ocz ddr2 1066 memory. however.. when i put a stick in the first slot it does not work. the fans spin up and nothing shows up on the screen. help. how do i get all 4 working. do i have to underclock? or do i have to add more voltage? or maybe a bios update? when i put a stick in the second and 4th slot it seems to work and i can get to the bios fine with 4gb
-
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
ocz memory on ud3p
- Thread starter runCMD3
- Start date
- Joined
- Dec 17, 2000
- Location
- Portland, OR
Use this template to post all of your current RAM settings in the BIOS (just replace mine with your own)...
Code:
DRAM Performance Control
Performance Enhance [Turbo]
Extreme Memory Profile (XMP) [Auto]
(G) MCH Frequency Latch [333]
System Memory Multipler [2.00B]
Memory Frequency [950]
DRAM Timing Selectable [Manual]
CAS Latency Time [5]
tRCD [5]
tRP [5]
tRAS [15]
Advanced Timing Control
tRRD [Auto/Default]
tWTR [Auto/Default]
tWR [Auto/Default]
tRFC [Auto/Default]
tRTP [Auto/Default]
Command Rate (cmd) [Auto/Default]
Motherboard Voltage Control
DRAM Voltage [2.1000]
DRAM Termination [1.050]Similar threads
