• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Ga-ep45-ud3l help

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

toiletcake

Registered
Joined
Mar 18, 2009
Hi I have a Gigabyte mobo Ga-ep45-ud3l I am presenly overclocking successfully at 30% oc ,with my e5200 which is running at 3.25 very stable running prime95 for 7 hours without errors and OCCT for 1 hour no errors .
I have alot on Auto except for memory settings and cpu voltage.
Any suggestions on going further with this.
My temps on Prime95 maxed at 52 C.
I would list all settings but there is alot to list,I'm looking for a easier way to display all my settings within bios for this board ,maybe soeone has a way also to do that.
Thks
 
Here's a template you can use to post all of your current BIOS settings, although I think I'd be quite happy w/ a 750 MHz overclock from a E5200...

Code:
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: 
CPU Clock Ratio ..........................: 
Fine CPU Clock Ratio.....................:
CPU Frequency ...........................: 


Clock Chip Control 
Standard Clock Control
CPU Host Clock Control..................: 
CPU Host Frequency (Mhz) ............:
PCI Express Frequency (Mhz) .........:

C.I.A.2 .................................:

Advanced Clock Control
CPU Clock Drive...........................:
PCI Express Clock Drive.................:
CPU Clock Skew (ps)....................: 
MCH Clock Skew (ps)...................:

DRAM Performance Control
Performance Enhance...................:
Extreme Memory Profile (X.M.P.).....:
(G)MCH Frequency Latch...............:
System Memory Multiplier ..............: 
Memory Frequency (Mhz) ..............: 
DRAM Timing Selectable ................:

Standard Timing Control
CAS Latency Time........................:
tRCD .........................................:
tRP'...........................................:
tRAS..........................................:

Advanced Timing Control
tRRD...........................................:
tWTR..........................................:
tWR............................................:
tRFC...........................................:
tRTP...........................................:
Command Rate (CMD) ....................:

Driving Strength Profiles
Driving Strength ............................:

Channel A
Static tRead Value.........................:
 tRD Phase0 Adjustment...................: 
tRD Phase1 Adjustment...................:
 tRD Phase2 Adjustment .................:
 tRD Phase3 Adjustment..................:
Trd2rd(Different Rank)....................: 
Twr2wr(Different Rank)...................: 
Twr2rd(Different Rank)...................: 
Trd2wr(Same/Diff Rank)..................: 
Dimm1 Clock Skew Control...............:
Dimm2 Clock Skew Control...............:

Channel B
Static tRead Value.........................:
 tRD Phase0 Adjustment...................: 
tRD Phase1 Adjustment...................:
 tRD Phase2 Adjustment .................:
 tRD Phase3 Adjustment..................:
Trd2rd(Different Rank)....................: 
Twr2wr(Different Rank)...................: 
Twr2rd(Different Rank)...................: 
Trd2wr(Same/Diff Rank)..................: 
Dimm1 Clock Skew Control...............:
Dimm2 Clock Skew Control...............:

Motherboard Voltage Control
Voltage Type.………... Manual
CPU
CPU Vcore….……….........................:
CPU Termination…..... 1.200V*.......:
CPU PLL…………………....1.500V*.......:
CPU Referen.…………....0.755V*.......: 
CPU Reference2………,,0.800V*.......: 

MCH/ICH
MCH Core…………….....1.100V...........: 
MCH Reference….…….0.800V...........:
MCH/DRAM Ref.…......0.900V...........:
ICH I/O……………….....1.500V............:
ICH Core…………...……1.100V............:

DRAM
DRAM Voltage ……....1.800V............: 
DRAM Termination .…0.900V............:
Channel A Reference 0.900V............:
Channel B Reference 0.900V............:

Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled] 

Integrated Peripherals
Legacy USB Storage Detect ..............[Disabled]
 
Last edited:
Just would like to know about my settings below ,maybe I have something I should have enabled or vice versa.

My memory is Gskill pc2-8000 ddr2-1000 5-5-5-15 2.0 2.1v
Headings with *** have not been touched and are bios readings in blue.


Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: auto
CPU Clock Ratio ..........................: 12
Fine CPU Clock Ratio.....................:0.5
CPU Frequency ...........................: 3.33


Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: enabled
CPU Host Frequency (Mhz) ............:266
PCI Express Frequency (Mhz) .........:100

C.I.A.2 .................................:disabled

***Advanced Clock Control
CPU Clock Drive...........................:800mv
PCI Express Clock Drive.................:800mv
CPU Clock Skew (ps)....................: 0ps
MCH Clock Skew (ps)...................:0ps

DRAM Performance Control
Performance Enhance...................:standard
Extreme Memory Profile (X.M.P.).....:auto
(G)MCH Frequency Latch...............:266mhz
System Memory Multiplier ..............: 3.00a
Memory Frequency (Mhz) ..............: 800mhz
DRAM Timing Selectable ................:auto

***Standard Timing Control
CAS Latency Time........................:5
tRCD .........................................:4
tRP'...........................................:4
tRAS..........................................:12

***Advanced Timing Control
tRRD...........................................:3
tWTR..........................................:3
tWR............................................:10
tRFC...........................................:52
tRTP...........................................:3
Command Rate (CMD) ....................:0

Driving Strength Profiles
Driving Strength ............................:auto

***Channel A
Static tRead Value.........................:5
tRD Phase0 Adjustment...................:0
tRD Phase1 Adjustment...................:0
tRD Phase2 Adjustment .................:0
tRD Phase3 Adjustment..................:0
Trd2rd(Different Rank)....................: 6
Twr2wr(Different Rank)...................: 6
Twr2rd(Different Rank)...................: 5
Trd2wr(Same/Diff Rank)..................: 8
Dimm1 Clock Skew Control...............:auto
Dimm2 Clock Skew Control...............:auto

***Channel B
Static tRead Value.........................:5
tRD Phase0 Adjustment...................:0
tRD Phase1 Adjustment...................:0
tRD Phase2 Adjustment .................:0
tRD Phase3 Adjustment..................:0
Trd2rd(Different Rank)....................: 6
Twr2wr(Different Rank)...................: 6
Twr2rd(Different Rank)...................: 5
Trd2wr(Same/Diff Rank)..................: 8
Dimm1 Clock Skew Control...............:auto
Dimm2 Clock Skew Control...............:auto

Motherboard Voltage Control
Load Line Calibration.....................Enabled
Voltage Type.………... Normal
CPU
CPU Vcore….……….........................:1.30000
CPU Termination…..... 1.200V*.......:1.200
CPU PLL…………………....1.500V*.......:1.550-auto
CPU Referen.…………....0.755V*.......: 0.805-auto
CPU Reference2………,,0.800V*.......: 0.760-auto

MCH/ICH
MCH Core…………….....1.100V...........: 1.100-auto
MCH Reference….…….0.800V...........:0.760-auto
MCH/DRAM Ref.…......0.900V...........:-----
ICH I/O……………….....1.500V............:1.550-auto
ICH Core…………...……1.100V............:1.100-auto

DRAM
DRAM Voltage ……....1.800V............: auto
DRAM Termination .…0.900V............:---
Channel A Reference 0.900V............:---
Channel B Reference 0.900V............:---

Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: -------
Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: --------

Integrated Peripherals
Legacy USB Storage Detect ..............[enabled]
sata ahci mode ...............................disabled
sata Port0-3 NativeMode...................disabled
cpu smartfan control ..........................disabled
 
toiletcake I have the same motherboard as you and was wondering if you are running raid? I've been looking everywhere for the driver download and cant find it anywhere. Any suggestions?? thanks
 
Back