LemonVibE
05-29-09, 11:42 AM
Hey all, This is pretty weird, Let me give you a quick background.
A couple of years ago, I got 2gb of Ram , and an x800GTO.
Around 6-8 months later the power supply decided to die.
I left the pc alone since i had to Start getting out more. (WoW is addictive).
So yesterday my new power supply (http://www.komplett.ie/k/ki.aspx?sku=338686) Came in The post.
After hooking up all the wires and such , Everything was working, Hard drive, Cd drive, Ram etc.
I did a fresh install of windows xp, Got sp3 and updated the drivers.
But When i tried to play Battlefield 2 , It went all red for the intro movie, then it was working , but when i tried to play it would go all black, But the sound was still working.
When trying to run the sims 2 , it would just stay all black but still have the sounds.
Dxdiag:
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
---------------
Display Devices
---------------
Card name: RADEON X800 GTO
Manufacturer: ATI Technologies Inc.
Chip type: ATI Radeon Graphics Processor AGP (0x5D4F)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_5D4F&SUBSYS_1600174B&REV_00
Display Memory: 256.0 MB
Current Mode: 1024 x 768 (16 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6925 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 2/25/2009 21:41:10, 325120 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 2/25/2009 22:58:57, 3565568 bytes
Device Identifier: {D7B71EE2-1E0F-11CF-F66F-0A36A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x5D4F
SubSys ID: 0x1600174B
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: All tests were successful.
D3D7 Test Result: All tests were successful.
D3D8 Test Result: Failure at step 29 (DrawIndexPrimitive): HRESULT = 0x8876017c (Out of video memory)
D3D9 Test Result: Failure at step 29 (DrawIndexPrimitive): HRESULT = 0x8876017c (Out of video memory)
And In ATITool , When i try to show 3d it crashes.
Im pretty sure i put the cables right in the pc. The 4 pin thing into graphics card from power supply.
Everything else is grand.
Any help would be appreciated.\
A couple of years ago, I got 2gb of Ram , and an x800GTO.
Around 6-8 months later the power supply decided to die.
I left the pc alone since i had to Start getting out more. (WoW is addictive).
So yesterday my new power supply (http://www.komplett.ie/k/ki.aspx?sku=338686) Came in The post.
After hooking up all the wires and such , Everything was working, Hard drive, Cd drive, Ram etc.
I did a fresh install of windows xp, Got sp3 and updated the drivers.
But When i tried to play Battlefield 2 , It went all red for the intro movie, then it was working , but when i tried to play it would go all black, But the sound was still working.
When trying to run the sims 2 , it would just stay all black but still have the sounds.
Dxdiag:
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
---------------
Display Devices
---------------
Card name: RADEON X800 GTO
Manufacturer: ATI Technologies Inc.
Chip type: ATI Radeon Graphics Processor AGP (0x5D4F)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_5D4F&SUBSYS_1600174B&REV_00
Display Memory: 256.0 MB
Current Mode: 1024 x 768 (16 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6925 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 2/25/2009 21:41:10, 325120 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 2/25/2009 22:58:57, 3565568 bytes
Device Identifier: {D7B71EE2-1E0F-11CF-F66F-0A36A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x5D4F
SubSys ID: 0x1600174B
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: All tests were successful.
D3D7 Test Result: All tests were successful.
D3D8 Test Result: Failure at step 29 (DrawIndexPrimitive): HRESULT = 0x8876017c (Out of video memory)
D3D9 Test Result: Failure at step 29 (DrawIndexPrimitive): HRESULT = 0x8876017c (Out of video memory)
And In ATITool , When i try to show 3d it crashes.
Im pretty sure i put the cables right in the pc. The 4 pin thing into graphics card from power supply.
Everything else is grand.
Any help would be appreciated.\