highest gf3 ti200 overclock

[RangerJoe]

so, what have you all done with these cards?

on my p2 350, i can get it up to 220/500, but whenever i get the computer in my sig working again, it should go higher

[adrianh11]

I have mine clocked at 200, 480. I know that isn't all that high. I have no stability problems whatsoever though. The card is a Palit Daytona. Getting about 6800 on 3dmark 2001 with my athalon xp 1700.

[NewbiePerson]

Mine runs at 245/515 stable

[Thermal]

Look at my sig...it was 225/525, found it ran better w/ lower settings.

[custoswashere]

My little PNY Ti200 made it to 250/535 before it would show an error in 3DMark2001. PLayed games fine. All on stock cooling. Just a few more torture tests and I'll add some better cooling to it.
With everything else clocked to the max made a score of around 7650 in mark2001.

[wildone]

PNY ti200 234/534@151fsb ,it will do 250/550 and more at lower fsb,I need to do a cooling mod to it to see what its capable of ,my current 3d mark score is 8334 I think.

wildone

[wolfsid]

Originally posted by wildone
PNY ti200 234/534@151fsb ,it will do 250/550 and more at lower fsb,I need to do a cooling mod to it to see what its capable of ,my current 3d mark score is 8334 I think.

wildone


nice mine is a gainward gf3ti200 and its running at ddr146fsb and 245/575 ram and heatsink stock.... 23.11 drivers, and stable i play all day long quake 3 and bench mark with 3d2001..
:D

[RainMaQer]

Mine blows all of yours away... IT'S DEAD!!! UNCLOCKABLE!!! Hah...
(I'm tryin guys... but I'm gonna cry)

[PilotPC]

I've had mine to 240/536 with an FSB at 150Mhz with 23.12 drivers and it gave me a 3DMark2001 score of 8792. I would love to crack 9000 with a Ti200. I have't tried to go higher.

[myndreach]

is there any chance of burning up the card doing this? i mean, it will show errors long before the card burns up, right?

[Da Whip]

Best I could do was 250/560 without any artifacts or tearing. It runs better at my current 230/530.

[myndreach]

I got my chaintek gf3 ti200 at 230/510 now...just ran 3dmark2001SE and had no artifacts (white pixelation, right?) or tearing (where one part of the screen slides to the side sort of, right?).

So it will start producing artifacts and tearing, and locking up way before it burns up, right?
:mad: :p

[arman68]

My Dell GF3 Ti200 runs stable without any artifacts at 255/490. Apart from the crap memory performance I think I am lucky with the GPU.

All with passive cooling and no RAM heatsink. :p OK, I have a silent 80mm fan mounted above the card with a Zalman bracket ;)

BTW this Dell is actually manufactured by MSI.

[SBeaver]

POV gf3ti200, 220 and 475.
It was really cheap so I don't really care.

[takiwa]

Gainward GeForce2 Ti200 Golden Sample @ 250/565 w/ stock cooling

will do 260/570, but shows artifacts

right now, I just have the coolbits sliders maxed...

[Matt761]

i got mine at 250/550. I could run it higher but iit freezes when i my fsb is overclocked.

[explorer]

I get 243/531 rock solid has run 3dmark in loop for over 24 hrs.

Explorer

[yfan]

you guys are lucky...the best i got mines up to was 225/520.

[takiwa]

Gainward GeForce2 Ti200 Golden Sample @ 250/565 w/ stock cooling

will do 260/570, but shows artifacts

right now, I just have the coolbits sliders maxed... I could run it higher but iit freezes when i my fsb is overclocked. 250/565 is with a 180FSB...:D God, I love this card!

[RoadWarrior]

My MSI does 267 in cool weather, (sub 25C ambient) 265 is safer when it warms up a bit, 261 is necessary over 30C. The memory is crappy, only does 487, I am planning a volt mod to try and get it over 500 hopefully to 520 if I'm lucky. Core seems to be overvolted by about 0.08 from stock according to the hardware monitor, so that might be helping me. I lapped the stock sink and thermal gooped, it, it dropped 5C but didn't get me any more mhz. It did prolong the time it took to lock though slightly I think, in 3DMark it used to get to just the Dragothic low res first few seconds, @272, but then after the lap it does all of the low res and locks toward the end of Dragothic high res.

Road Warrior

edited fro tryping errrers

[Morbid]

PNY GeForce3 Ti200 running 250/560 all day, everyday ;)