Gigabyte EP45-UD3R Rev. 1.1 & Q6700 Stepping B, G0

*************************************************

Robust Graphics Booster [Auto]
CPU Clock Ratio [8x]
   (8x400 = 3.6Ghz)

*********Clock Chip Control*************************

CPU Host Clock Control [Enabled]
CPU Host Frequency (Mhz) [400]
PCI Express Frequency (Mhz) [Auto]
C.I.A 2 [Disabled]

*********Advanced Clock Control*********************

(These are default settings, didn't touch them)

CPU Clock Drive [800mV]
PCI Express Clock Drive [900mV]
CPU Clock Skew (0ps) [Default]
MCH Clock Skew (0ps) [Default]

*********DRAM Performance Control******************

Performance Enhance [Turbo]
(G) MCH Frequency Latch [Auto]
System Memory Multipler [2.66D]
Memory Frequency (SPD 1066) [1066]
DRAM Timing Selectable [Manual]

CAS Latency Time [5]
tRCD [5]
tRP [5]
tRAS [18]

*********Advanced Timing Control*********************
	     (Values)
tRRD [Auto]    (4)
tWTR [Auto]    (4)
tWR [Auto]     (8)
tRFC [Auto]    (72)
tRTP [Auto]    (4)
Command Rate (cmd) [Auto] (0)

*********Motherboard Voltage Control******************

Load-Line Calibration [Enabled]
CPU Vcore (1.27500V) [1.37500V]
CPU Termination (1.200V) [Normal]
CPU PLL (1.500V) [Normal]
CPU Reference (0.760V) [Normal]

MCH Core (1.100V)[Normal]
MCH Reference (0.760V) [Normal]
MCH/DRAM Refernce (0.900V)[Normal]
ICH I/O (1.500V)[Normal]
ICH Core (1.100V) [Normal]

DRAM Voltage [1.8000V]
DRAM Termination (0.900V) [Normal]
Channel A Ref (0.900V) [Normal]
Channel B Ref (0.900V) [Normal]

*************************************************