c2 1ghz anyone? :(

[RisrullarN]

isnt there someone out there who can tell me how far u have reached with the 1ghz and vcore @ 1.8v?

i know this is different from cpu to cpu but i just want something to go after. thx in advance!

[Yodums]

They usually get to 1.3 on average, so basically 133fsb. But anything beyond that willl need better cooling and airflow of course.

Yodums

[RisrullarN]

yes..
but 1.3 w/ 1.8v? default voltage is 1.75!
i cant go above 1.8cv with a tualatin mobo

[Pecos]

The i815E (B0 stepping) Tualatin-ready mobos aren't the best choices for overclocking non-Tualatin CPU's for that very reason.

[RisrullarN]

i know that..
i just wanna know what to expect with 1.8cv ? someone ?
currently running @1100, 1.7v rock stable

[Ratinfested]

I have a cleron 1000Mhz that runs a 133fsb@1,333Mhz with 1.75v. will do around 1350 with default volts.

[RisrullarN]

okey ratin.. thx.
what kinda cooling do u have? temps? mobo?

[Yodums]

It wouldn't matter just because they get it doesn't mean you can, everyone has a different setup. Some may hit 133fsb with default voltage some may not etc.

[RisrullarN]

i know. i just wanna know what setups they have and how far they could go..
if i reach 1200 mhz w/ 1.8v im happy.

[Yodums]

Originally posted by RisrullarN
i know. i just wanna know what setups they have and how far they could go..
if i reach 1200 mhz w/ 1.8v im happy.

Probably can, you'll hit with either 1.8v or 1.85v I'm sure.

[RisrullarN]

yeah, but i still cant go up to 1.85 w/ a tualatin mobo and a coppermine cpu :((

1.8v is max!

[takiwa]

even with a vid-pin mod and a BIOS flash?

[RisrullarN]

does anyone know if this hs fits on the st6 mobo?

http://kylning.com/product_info.php?cPath=1_21&products_id=126

thx.

[funnyperson1]

yes it does....

[takiwa]

that's a mean-looking HS...skimpy fan, though...

[Ratinfested]

i have an 800 celeron that i run 1200MHz with 150 fsb @1.95v
30c idle and 43c full load

i have the 1000 celeron that i run 1333MHz with 133fsb@1.75v
30c idle and 43 full load
when i run the 1000@ 1400MHz with 2v the temp starts to soar so it seems to me that the increase in MHz makes alot of heat and not the increased voltage.
I run a sk6 with a 4800 rpm fan on bolth cpu's, i have a 7000 rpm fan but the noise sucked and it didnt cool much better.

[Ratinfested]

I use an abit sa6 now 50-250 fsb settings in 1 increments. And i have a retired Asus p3v4x in my wifes pc i ran these celerons on

[mastsablaster]

I just got my 900 mhz Celeron to 1278 with air cooling running prime 95 running on a PeP-66 heatsink and Delta 60 mm fan with a peltier.It runs real stable, but at 1300 under prime95 it gives an error message ,but will run 1300 without prime real nice..Maybe some one has some Ideas why.Maybe run more than 1.9 volts or a 80 mm fan on top? or a 40.CFM fan..:confused:

[RisrullarN]

nice! :) im very grateful..
maybe it will go longer than 1200 w/ 1.8v
im gonna replace the fan with a 80mm.. :)


are u guys totally sure i cannot up the CV more than 1.8v on a st6 with a coppermine cpu ? thx !