- Joined
- Sep 20, 2001
- Location
- Minneapolis
Just bought a multimeter and took the readings off of my center mosfet on my Epox 8KHA. It has a Deer 300 Watt PSU that has been giving me trouble.
At Full Load:
MBM says 4.76-4.78
Multimeter says 4.86
At Idle:
MBM says 4.81
Multimeter says 4.90
(Interestingly, MBM had been giving me 4.68, but I unplugged and plugged in the ATX connector tightly. Proof positive those things can suck...)
Anyway, the multimeter says 4.97 at the molex. Should I do the mosfet mod? This Deer claims to have 160 watts of combined power. It isn't bad for a generic.
I am running an Epox 8KHA with an Athlon [email protected].
thanks,
flounder43
At Full Load:
MBM says 4.76-4.78
Multimeter says 4.86
At Idle:
MBM says 4.81
Multimeter says 4.90
(Interestingly, MBM had been giving me 4.68, but I unplugged and plugged in the ATX connector tightly. Proof positive those things can suck...)
Anyway, the multimeter says 4.97 at the molex. Should I do the mosfet mod? This Deer claims to have 160 watts of combined power. It isn't bad for a generic.
I am running an Epox 8KHA with an Athlon [email protected].
thanks,
flounder43