Quick Cooling Question!

[OC-Master]

OK,

Tonight is the night that I MOD my motherboard and grab more voltage for my processor.

I have a 1.0GHz AXIA and I have it running @ 1.85V @ 1.33GHz (133x10). Temperature is 49c~51c @ 1.85V 1.33GHz

Now, I'm planning making the 1.4GHz mark with my processor, will bumping up the voltage to 1.9V or 1.95V allow me to make it to 1.4GHz?. I can already run my computer at 1.4GHz but the only thing is I cant run Prime95. If I cant run Prime95, I dont consider the computer capable to run @ 1.4GHz. Fair :) ?

Ok, Will raising the voltage to 1.95V allow me to achive stability @ 1.4GHz? I think the heat will build yet another 4 degrees when I'm running @ 1.95V right?

EDIT: Let me point out that my case has AWESOME cooling! Temp on mb case is 23C~25C tops! 7 Case fans inside.

Thx in advance,


AXIA

[eh?]

49-51c is just a little high for my taste you might wanna think about lowering the temps.....

[Zazuk]

might think about a better cooler which could allow to run @1.4 with out a voltage MOD.

[Dissolved]

Originally posted by Zazuk
might think about a better cooler which could allow to run @1.4 with out a voltage MOD.

yea, 1.9v+ sounds rather high... what HSF u useing?
he should hit 1.4 easy if he has good memory..

[joatam316]

49-51C sounds a little high. I suggest you try some Artic Silver II or III if you can. Also, since you have seven fans in your case, i would expect that one of them acts as a blowhole on the top right? If not, you should be adding another fan before you try 1.4:p

[Dissolved]

Originally posted by joatam316
49-51C sounds a little high. I suggest you try some Artic Silver II or III if you can. Also, since you have seven fans in your case, i would expect that one of them acts as a blowhole on the top right? If not, you should be adding another fan before you try 1.4:p

anything over 51 is too hot... i think he just needs a better HSF and some ac3 and he'll be ok..