Geforce 3 Ti450!!!!!!!!!!!

[WeaponX]

Check this out!
http://www.pcpowerzone.co.uk/reviews.php?id=52&page=1

[wolfsid]

Originally posted by WeaponX
Check this out!
http://www.pcpowerzone.co.uk/reviews.php?id=52&page=1


YES I WROTE 3 post i think on my cards i have 2 gainward geforce ti 450 one has 4 ns ram on it the other i am not sure.. but both overclock very high and nice..

[RainMaQer]

I just hope Gainwards RMA dept is as good as their card... I want mine back!!!:(

[wolfsid]

Originally posted by RainMaQer
I just hope Gainwards RMA dept is as good as their card... I want mine back!!!:(

Acctually they are great Also I just recieved mine after about 10 days. I shiped it out cuz i kinda blew it up and they send me a newer version and better heatsink also.. then they called the day before i got it just to tell me that i was getting it like tomorrow..

[WeaponX]

I feel dumb...

[wolfsid]

Originally posted by WeaponX
I feel dumb... :D :beer:

[o770]

i just noticed at one of the online stores listed in the end of the article that there is now the Ti480 (http://www.overclock.co.uk/moreinfo.php?id=435), 3.8ns RAM!

[AllRoy]

how high have you been able to overclock it?

[wolfsid]

Originally posted by AllRoy
how high have you been able to overclock it?

so far 253/580

[univox]

Originally posted by wolfsid


so far 253/580

Stock ram sinks?

If not how high with the stock ram sinks?

[AllRoy]

Originally posted by wolfsid


Acctually they are great Also I just recieved mine after about 10 days. I shiped it out cuz i kinda blew it up and they send me a newer version and better heatsink also.. then they called the day before i got it just to tell me that i was getting it like tomorrow..

There seems to be a 4.5ns and a 4ns floating around...I think the 4.0ns has the better sinks and fan.

[sb-pimp]

His scores seem alittle low for 3dmark and Glexcess i ran both and recieved a 8400 in 3dmark and 6136 inGlexcess with some better ram and a unlocked chip and some more ocing on the vid card and i could recieve some better scores.

[wolfsid]

Originally posted by univox


Stock ram sinks?

If not how high with the stock ram sinks?


Stock heatsink and ram.. getting some artice silver 3 and some other little tools going to tweak a little more to see what happens i can have it at 260/586 but gets a little girrbly .. so i am guessing it either need more voltage or better cooling maybe both..

[Element-Xero]

if the problem is with glitches and artifacts in graphics then its voltage not cooling almost definately. Usually its the memory voltage.

[CMangano]

How can you increase the voltage to your video card?

[Jman13]

I wish I'd known about the Gainward when I bought my GF3 ti 200, but I can't complain. With my Visiontek, I've been able to hit 233MHz core (tried 240...locked hard after 5 minutes), and 530 MHz mem without a crash or artifacts. The 530 was not extensively tested, but it made it through a running of 3DMark 2001. I went to 535, and it was fine for a few minutes, then all of a sudden HUGE bars of color went flying across the screen and the machine locked, with the bars still going wild. Needless to say, I haven't gone near that speed again. I keep mine clocked at 210/470 all the time, since I really don't need it to be faster right now. (just a smidge faster than an original GF3) Maybe when games get a little more complex, I'll bump it to 220/480, or 220/500. My case starts getting a little warm at 233 core, so I probably won't ever leave it at that speed, but oh well. I figure, my ti200 easily hits "ti 400" levels, and comes damn near to stock ti 500 levels. Nothing to complain about.

[wolfsid]

Originally posted by Jman13
I wish I'd known about the Gainward when I bought my GF3 ti 200, but I can't complain. With my Visiontek, I've been able to hit 233MHz core (tried 240...locked hard after 5 minutes), and 530 MHz mem without a crash or artifacts. The 530 was not extensively tested, but it made it through a running of 3DMark 2001. I went to 535, and it was fine for a few minutes, then all of a sudden HUGE bars of color went flying across the screen and the machine locked, with the bars still going wild. Needless to say, I haven't gone near that speed again. I keep mine clocked at 210/470 all the time, since I really don't need it to be faster right now. (just a smidge faster than an original GF3) Maybe when games get a little more complex, I'll bump it to 220/480, or 220/500. My case starts getting a little warm at 233 core, so I probably won't ever leave it at that speed, but oh well. I figure, my ti200 easily hits "ti 400" levels, and comes damn near to stock ti 500 levels. Nothing to complain about.

Solve your problem get some Artice silver 3 and put a little more voltage to it..