Amd Duron 1000

[BigStud87]

How can i overclock my amd duron 1000 mhz to get the most out of the chip?? I'm only running at 30 deg celcius so i have plenty of room for a lil more heat

[res0r9lm]

depends on which motherboard you have some can't overclock and some can. first thing you need to do is unlock it by connecting L1 bridges

[BigStud87]

What are l1 bridges the pins right?? i heard u draw on it with a pencil but not sure if it was true and dont know the direction. I have a Award bios on the lucky-star K7MKLE mobo.:burn:

[res0r9lm]

bridges are on the top the L1 are to unlock they come cut just draw line to file the gap then you should be able to change multiplier you might have to raise vcore up if not stable. you should be able to get atleast to 1200 mhz becareful not to cross the bidges though

[res0r9lm]

what chipset is your board

[BigStud87]

ok u lost me with the whole l1 stuff, is there any image u could send me or vid-email????

[BigStud87]

Via vt8361+686b (KLE-133) chipset

[res0r9lm]

just wondering if this chipset is stable at 133 fsb

check this out wouldn't worry about anything but L1
http://www.ocinside.de/index_e.html?/html/workshop/socketa/xp_painting.html

[BigStud87]

How do I huse the web page??????? its a lil confusing i got a 1000 mhz w/ 133 think multiplier is 7.5

[res0r9lm]

here is the bridges on a cpu factory unlocked

[Ozzman]

there are MANY ways to unlock it any MANY articles i used defogger repair kit which i got from pepboys for 8 bucks it a little more then a pencil but im sure mine wont rub or wear off and is making good contact (i just wish i did not knock that TINY bottle over :( ) i was hopeing i could return it sence i only need a LITTLE tiny bit..

[kwoon]

res0r9lm
has post the attachment

that the L1 bridges unlock it with pencil 2b
and see how it's work

[res0r9lm]

never used pencil 2b... have used plain old no.2 pencil noticed that some of the multipliers don't work sometimes might have something to do with how well you pencil the bridges because have redone and got all multipliers.

[Yatta]

conductive ink with a toothpick works nice and can be washed off if you screw up.

[res0r9lm]

tried it with a needle too difficult to get enough on bridges. might try with toothpick to see if it is easier

[res0r9lm]

the price of defogger paint is chump change compared to what people spend to oc their puter

[ZooomIT]

so what are the materials u r suggesting to use pls...i need to ov' mine's too i'm planning to go for 1100mhz with 1.7 or 1.8v is this a good idea ... and if you have the time...can u tell me specificly about how to do it...oh i'm using a 25 bucks fan...don't expect me to go for water cooling or those hundreds of dollars fan...just help me get the most out that duron with the fan i'm having thanks a lot....

[res0r9lm]

Originally posted by ZooomIT
so what are the materials u r suggesting to use pls...i need to ov' mine's too i'm planning to go for 1100mhz with 1.7 or 1.8v is this a good idea ... and if you have the time...can u tell me specificly about how to do it...oh i'm using a 25 bucks fan...don't expect me to go for water cooling or those hundreds of dollars fan...just help me get the most out that duron with the fan i'm having thanks a lot....

Read this (http://www.overclockers.com/tips402/)

[FRANK]

First of all, Welcome to the forums.

Follow the above advice and read the article on closing the bridges. I would also suggest that you spend some time in the "Beginners Guides", a link is provided on the front page of this site.

Once you are ready to unlock the bridges, below is a picture of the product that I've used many times with very good success.

Good Luck!

[BigStud87]

Really need to know about where the update for my bios is cant find where to change settings its an Award bios on a K7MKLE mobo w/ via vt8361+686b (kle-133) chipset

[FRANK]

First of all, here's a link to the latest BIOS update for your Lucky Star K7MKLE motherboard;

http://www.lucky-star.com.tw/english/technical/bios/via.htm#SLOT-A

If you looked for this, you didn't look very far. This BIOS is the first one listed on the Lucky Star Technical support BIOS update page, easily accessed from the front page of their site.

As posted above, it would be in your best interest to do some research so you will be prepared to deal with the little problems that you will surely run into as you delve into this "black art" of overclocking. A good place to begin this quest for knowledge is right here at OVERCLOCKERS.COM. There are some "Beginners Guides" for which there is a link provided on the front page. Here you will find some very useful information that will give you a good start toward understanding some of these basic questions that you have been posting.

This is not meant to give you a hard time, rather to guide you to the resources that you will find useful. The more informed that you are, the better your chances are for a successful experience.

Good Luck!