PDA

View Full Version : This is weird on the voltage.


gsxr750
01-29-02, 06:55 PM
Hi every one.

This seem odd. I take out sisoft 2001 and install 2002 version.
I then check my voltage and it look odd for me. I not sure if I see it correctly.. hummm....
look at the core voltage it said 3.1 I know AMD Duron only need 1.65-1.85 roughly. But it show I have 3.1:mad:
also look at my +5v voltage it said 6.44v, I know I have sux PSU.
and then my +12v voltage it said 15.6. hummmmm

gsxr750
01-29-02, 06:56 PM
Same thing here.

bobt17
01-29-02, 07:25 PM
look in your bios to find the real voltages because that cant be right...

Thelemac
01-29-02, 07:33 PM
Personally, I don't trust Sandra to read anything onboard right. Try the monitoring program that shipped with your motherboard or Motherboard Monitor.

Silver
01-29-02, 11:27 PM
I'd second that. Motherboard monitor or the program that may have come with your mobo.

gsxr750
01-30-02, 12:19 AM
Thank all.

That what I thought but it could result from what I've done to my mainboard.
I have to cut up some connector line on the board then add dipswitch. That didn't go well.
It work but I have trouble moving the computer around or add/remove hardware.
so I put it back but the thing is that, those line are so small to solder it togather. (to close togather)
So I use the pencil trick. LOL
That might have mess it up. but the CPU working.:D

Ozzman
01-30-02, 02:19 AM
Motherboard monitor blows also mine cant tell for ****... but it does a good job on my temps..

P.S why is it that i set the vcore to 1.80 in bios yet the pc health says 1.85??

Silver
01-30-02, 01:23 PM
Just FYI, on my KT7A the voltage when set at 1.85 was actually getting 1.89. After checking around the internet I found this to be rather typical. I no longer look for exact voltages but instead something resembling what I have it set at.