Unstable Linux GPU

[AmbientFiction]

[22:49:02] Working on Protein
Run: exception thrown during GuardedRun
[22:49:03] Run: exception thrown during GuardedRun
[22:49:03] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.
[22:49:03] Going to send back what have done -- stepsTotalG=0
[22:49:03] Work fraction=0.0000 steps=0.
[22:49:07] logfile size=9125 infoLength=9125 edr=0 trr=23
[22:49:07] + Opened results file
[22:49:07] - Writing 9661 bytes of core data to disk...
[22:49:07] Done: 9149 -> 3307 (compressed to 36.1 percent)
[22:49:07] ... Done.
[22:49:07] DeleteFrameFiles: successfully deleted file=work/wudata_03.ckp
[22:49:07]
[22:49:07] Folding@home Core Shutdown: UNSTABLE_MACHINE


Cad isn't overclocked and was doing just fine for the last few days only think I changed was fixing my xorg.conf here is my config via these 2 commands gksudo nvidia-xconfig and then gksudo nvidia-settings:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@crested) Sun Feb 1 20:25:37 UTC 2009

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Tue Mar 24 06:15:32 PST 2009

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection

Section "ServerFlags"
Option "Xinerama" "0"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "EIZO NANAO FlexScan FX-E7S"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 250"
Option "Coolbits" "1"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1024x768 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection


Input on this would rock just lost 5 - 6k ppd.

[Sydney]

What linux version and what driver version?

[AmbientFiction]

What linux version and what driver version?

Ubuntu 9.04 and 180 driver system has had the following done:
apt-get dist-upgrade
apt-get ialibs-32
apt-get samba
coolbits enabled

Can't think of anything else I've done major.

Booted into windows and now running 20 round cuda test. Machine was great for like 3 - 5 straight days of 24/7 folding.

[Sydney]

Try deleting the work folder, unitinfo.txt and queue.dat.

[AmbientFiction]

Fixed deleted work folder, unitinfo.txt and queue.dat. The first time and that didn't do it next time deleted all of the a fore mentioned files along with the FAH cores. Reran it and it was fine looks like my cores ended up corrupted.

All is good now.

[Sydney]

Good to hear, let's hope it keeps working :D

[ChasR]

ia32-libs would be the correct package. I don't have a 9.04 workstation, but 9.04 server and 9.10 come with the ia32-libs built in.

[AmbientFiction]

ia32-libs would be the correct package. I don't have a 9.04 workstation, but 9.04 server and 9.10 come with the ia32-libs built in.

Yep my bad ia32-libs is what that should have been. Yeah this is Ubuntu 9.04 x64 studio. Its super snazzy. I'd been wanting to test it out for a but now and being that I run ubuntu the last time I wanted to play with studio this time.