I started to put together my water cooling kit 2 years ago,
but never got round to setting it up.
I am now in a position to do this and would welcome your views on what I intend to use..
At the time I was going to cool my core duo E6300.
I now plan on getting a new system .To start with it will be just the CPU that is w/c , but may add the graphics later if worth it.
It will comprise of :-
CPU - i7 920
Mobo - Asus P6T SE or P6TD deluxe (not sure if it's worth paying the extra )
Graphics - Asus HD5870
Memory - Corsair Dominator DDR3, TR3X6G1600C8D - 6GB(3x2GB)PC3-12800(1600)
or is there something else I should consider.
Power Supply - 850W Enermax Revolution85+ (in case I get 2 graphics card)
HHD - Samsung 750gb
mCubed T Balancer BigNG
Case - MM UFO
W/C kit that I have already :-
CPU block - D-Tek FuZion V1 with accelerator Nozzle Kit
I realize that I will need a FuZion Intel Core i7 (LGA1366) Pro-Mount Set
or should I get a Swiftech Apogee XT
Rads - 2 X ThermoChill PA160
Res - AlphaCool Cape Bullseye - Black Solo (POM)
I will be using 10mm hose and push fit connectors.
As I'm using 10mm push fit connectors is it ok to use 3/8" tubing with this
or does it have to say it's 10mm.
Items to get :-
Pump - DDC 3.2 Ultra(18w) with Plexitop.
I see they do a 3.25 now , what’s the difference.
Also does it matter what top you have on it .
I was going for the alphacool as it allowed me to add a LED in it .
Is this the best pump to get .
What is the best Pump Dampening Mounting Kit to get.
What it the best coolant to use (not coloured) and I was going to use Silver KillCoils.
How much of this do you have to put in a system.
Thanx
__________________
but never got round to setting it up.
I am now in a position to do this and would welcome your views on what I intend to use..
At the time I was going to cool my core duo E6300.
I now plan on getting a new system .To start with it will be just the CPU that is w/c , but may add the graphics later if worth it.
It will comprise of :-
CPU - i7 920
Mobo - Asus P6T SE or P6TD deluxe (not sure if it's worth paying the extra )
Graphics - Asus HD5870
Memory - Corsair Dominator DDR3, TR3X6G1600C8D - 6GB(3x2GB)PC3-12800(1600)
or is there something else I should consider.
Power Supply - 850W Enermax Revolution85+ (in case I get 2 graphics card)
HHD - Samsung 750gb
mCubed T Balancer BigNG
Case - MM UFO
W/C kit that I have already :-
CPU block - D-Tek FuZion V1 with accelerator Nozzle Kit
I realize that I will need a FuZion Intel Core i7 (LGA1366) Pro-Mount Set
or should I get a Swiftech Apogee XT
Rads - 2 X ThermoChill PA160
Res - AlphaCool Cape Bullseye - Black Solo (POM)
I will be using 10mm hose and push fit connectors.
As I'm using 10mm push fit connectors is it ok to use 3/8" tubing with this
or does it have to say it's 10mm.
Items to get :-
Pump - DDC 3.2 Ultra(18w) with Plexitop.
I see they do a 3.25 now , what’s the difference.
Also does it matter what top you have on it .
I was going for the alphacool as it allowed me to add a LED in it .
Is this the best pump to get .
What is the best Pump Dampening Mounting Kit to get.
What it the best coolant to use (not coloured) and I was going to use Silver KillCoils.
How much of this do you have to put in a system.
Thanx
__________________