OCZ Flex II 9200 at 1333 mhz

Baunegaard · Jan 8, 2010

I have a 2x2 GB OCZ Flex II DDR2 9200 ram kit, on a gigabyte ga-ep45-ud3r motherboard, and i have just clocked them from the standard 1150 mhz to 1333 mhz, and they run stable. Timings set at 5-5-5-15 and voltage at 2.180.

I think it sounds a little too good becouse every other place i have read about overclocking these rams, i have only seen people getting them to around 1200 mhz.

Anyone else with some experience with these rams?

redduc900 · Jan 8, 2010

Can you post a pic. w/ CPU-Z open to the 'Memory' tab, and another w/ MemSet open showing all of the current sub-timings?

Baunegaard · Jan 8, 2010

Of course, here you go.

psionic98 · Jan 8, 2010

I didn't look up the specs, but that sounds like a lot of volts to run any memory on

redduc900 · Jan 8, 2010

Very nice. What's the current FSB?

psionic98 said:
I didn't look up the specs, but that sounds like a lot of volts to run any memory on

The Flex II XLC is rated to run at 2.1 - 2.15 EVP at DDR2-1150MHz. In fact I've been running mine at up to 2.18 - 2.23V for over a year without any ill effects.

Baunegaard · Jan 8, 2010

The processor is a Q9550 E0 1333 mhz fsb (333x8,5), clocked to 3 Ghz 1600 mhz fsb (400x7,5)

Baunegaard · Jan 8, 2010

By the way the rams is not watercooled. Will there be a heat risk with the clock?

redduc900 · Jan 8, 2010

There shouldn't be any heat issues at 2.18V. I could never seem to get mine Memtest stable at anything over 1186MHz (FSB of 494MHz) and timings of 5-5-5-15-6-77-10-18-13-5-9-7-6. tRFC in my BIOS only goes up to 77 (shows 63 in MemSet), and I've tried vNB up to 1.55V, and Vdimm up to 2.4V w/ no luck hitting 1200MHz at a FSB of 500MHz on a 5:6 divider (4.0GHz clock w/ a 8.5 multiplier).

Baunegaard · Jan 8, 2010

I have just run memtest86+ and it gave me errors in test 5. But settings timmings to 6-5-5-15 seemed to have stoppet it, ran 1.5 hours without any errors.

coco16 · Jan 8, 2010

redduc900 said:
Very nice. What's the current FSB?

The Flex II XLC is rated to run at 2.1 - 2.15 EVP at DDR2-1150MHz. In fact I've been running mine at up to 2.18 - 2.23V for over a year without any ill effects.

lol i run my crucial ballistix tracer ddr2 800mhz at 2.25v@1066mhz

MIAHALLEN · Jan 8, 2010

Baunegaard said:
I have just run memtest86+ and it gave me errors in test 5. But settings timmings to 6-5-5-15 seemed to have stoppet it, ran 1.5 hours without any errors.

WOW...that's excellent

Very nice RAM...you wanna sell it

I'm joking as I don't have any DDR2 systems anymore, but if I did, I'd give you $$$ for 'em

Dooms101 · Jan 9, 2010

Wow holy crap... I wish my OCZ Gold's would get off their asses and hit those speeds. My DDR2-1066 won't go past 1130mhz with 2.3v

OCZ Flex II 9200 at 1333 mhz

Baunegaard

New Member

redduc900

Inactive Moderator

Baunegaard

New Member

psionic98

Member

redduc900

Inactive Moderator

Baunegaard

New Member

Baunegaard

New Member

redduc900

Inactive Moderator

Baunegaard

New Member

coco16

Member

MIAHALLEN

Senior Member

Dooms101

Member

Similar threads