ASUS P5N-D ----E2160 PLEASE HELP

Hello everyone
I saw here lots of people with a lot of knowledge in "the art of overclocking" and i need some advice from those people . I have recently bought an Asus p5n-d and i need help getting my e2160 at least at 3ghz. Can some one here post what should i do in bios?

now running :

fsb 1333
bus:333
multiplier:x8
Cpu Freq 2666
Ram 798mhz

If i go x9 so freq would be 3.0ghz windows won't boot.

Can someone help me out please ?

Thanks

2x1gb corsair xms2 4-4-4-12 and 2.1V.
nvidia 9600gt sli
Ocz 500W SLI PSU
Ocz 32gb solid state drive for OS
WD Caviar Black 1 TB - storage/games
Win 7 ultimate x64

Thanks in advance !!!

Besides the P5N-D and E2160, list the rest of your system spec's including a direct link to your specific RAM (showing SPD timings and voltage, including quantity).

redduc900 said:

Besides the P5N-D and E2160, list the rest of your system spec's including a direct link to your specific RAM (showing SPD timings and voltage, including quantity).

Click to expand...

2x1gb corsair xms2 4-4-4-12 and 2.1V. (ill get a 4gig set soon)
nvidia 9600gt sli
Ocz 500W SLI PSU
Ocz 32gb solid state drive for OS
WD Caviar Black 1 TB
Win 7 ultimate x64

What's the frequency the RAM is rated at?

redduc900 said:

What's the frequency the RAM is rated at?

Click to expand...

800mhz

Changed fsb to 1180 from 800 so the bus speed is now 295 X9 and core speed 2655. ram 840mhz but i only changed fsb and unlinked the ram.
If i go higher with the fsb it won't run orthos stable.
What should i do ?

Change the FSB - Memory Ratio from 7:10 to 5:4 for an effective 737MHz DRAM frequency, or loosen the four primary timings to 5-5-5-15 at 840MHz on the current divider.

redduc900 said:

Change the FSB - Memory Ratio from 7:10 to 5:4 for an effective 737MHz DRAM frequency, or loosen the four primary timings to 5-5-5-15 at 840MHz on the current divider.

Click to expand...

So if ill put the mem ratio to 5:4 i could go higher with the fsb so the ram freq will stay in the 800mhz area. Any other setting i need to enable/disable because the bios is untouched besides fsb and memory ratio.

now running :

fsb 1333
bus:333
multiplier:x8
Cpu Freq 2666


If i go x9 so freq would be 3.0ghz windows won't boot.

Can someone help me out please ?

Thanks