View Full Version : Bobnova benching LIVE
Bobnova
03-19-10, 12:14 PM
Ok not quite yet, need to make my webcam happy first, but soon!
I'll be doing various 2d benches with my e6300 (old type) and P5q Pro on Dry Ice.
Linkylinky:
http://www.livestream.com/novaworks
Come join me!
D33PJackal
03-19-10, 12:21 PM
Lol, I had the exact same idea as this when I woke up this morning.
Bobnova
03-19-10, 12:54 PM
Stream's live, insulating right now.
At work so I can't watch. Hope its a good clocker! :attn:
Wish I could watch at work, but sadly, I can't. Happy Benching!
Oh and I tweeted/facebooked all our followers/fans about this. No pressure though. We don't have that many yet anyways.
Matt
D33PJackal
03-19-10, 02:06 PM
Yay work, it is nice to post and make dolla dolla beelz.
bob, you're missing the benching hat. Missing out on that extra POWAH.
Bobnova
03-19-10, 05:43 PM
Still going! <1lb of dice remains.
SeanBest
03-19-10, 06:22 PM
Awesome idea
congrats on the runs man. good work :D
MattNo5ss
03-19-10, 07:13 PM
Congrats on #23!
You bumped me down a spot, just like I thought you would :D
Great job!
I see lots of boints, must have been a good session.
Bobnova
03-19-10, 07:48 PM
Superpi1m and wprime32m went really well for me, cpuz got a few. pifast and the long benches... Yegh :P
Found a solid wall at 532fsb, but 531.6 was fine :D
Got ~41.4 points i think, plenty to move up a bit! Now i need to sell this cpu and get an e6400 or e6600.
Bobnova
03-19-10, 08:15 PM
The highlights of todays efforts :D
http://valid.canardpc.com/cache/screenshot/1087158.png
http://bobnova.com/ocforums/wp21.557.jpg
http://bobnova.com/ocforums/pi15.125.JPG
Bobnova
04-09-10, 10:03 PM
I'm live again!
livestream.com/novaworks
You better have the hat this time or you're missing out on mhz.
Bobnova
04-10-10, 12:37 AM
Got a hat. Got a 19 point cpuz and a 19 point pi1m. On 32m now.
Bobnova
04-10-10, 01:10 AM
FYI: I do not like pi32m and wp1024. They are not my friends.
MattNo5ss
04-10-10, 01:47 AM
Beast of a E6600...just racking up the points :D
EDIT: I ended up lagging out, looking forward to checking your submissions tomorrow.
Bobnova
04-10-10, 08:52 AM
14th on the team now, only chinstrap remains before it's 200+ points time. Maybe i can get that e4500 to go like this and get brollock's 920 :D
well You have to go through me first... once I get up there.
All day benching session with 2 systems. I got my S939 going and my 940.
I got a lot of hardware to burn through :D
Bobnova
04-12-10, 10:50 PM
Ok, here's the benching station:
http://www.bobnova.com/ocforums/diceing.jpg
And here's right after the pot came off:
http://www.bobnova.com/ocforums/dice-insulation.jpg
Terrible mount, the pot runs into one cap of each bank of VRMs. I'm going to cut a couple notches in the pot to fix this issue. None of my four dice runs have had good mounts.
EDIT:
You can actually see the dent in the middle cap on the bank at the bottom of the picture.
Bobnova
04-12-10, 10:52 PM
FYI: I do not like pi32m and wp1024. They are not my friends.
Ironically, wp1024 got me globals. It is my friend after all :P
Bobnova
04-17-10, 01:59 PM
Hoping to do some benching (live, of course) tonight.
Right now, i'm pre-flattening some eraser for insulation. Should save 15-25 minutes on setup having thin flat slabs already made.
KonaKona
04-17-10, 02:10 PM
Looking forward to it, hopefully I'll have my rig back together by then so I can be in chat without horrible amounts of lag.
Also, I'm not sure how much it helped, but I twisted the pot around on the CPU a few times while mounting and I think I got a nice mount. It looked pretty even to me. :shrug:
hokiealumnus
04-17-10, 04:45 PM
Bob, PM me if you do decide to get this going, what time it will be and the URL. If I can, I'll post it on the frontpage & the Overclockers facebook page.
EDIT - Right, let me know what you're going to be benching too. :)
Bobnova
04-17-10, 05:00 PM
Don't know what time exactly, probably sometime between six and eight pacific, I'll post here and PM you when it goes live.
hokiealumnus
04-17-10, 07:57 PM
Just checking in. Will try to keep an eye on my PMs occasionally tonight. If you go live I'll get it published. :)
Bobnova
04-17-10, 08:17 PM
We're live!
http://www.livestream.com/novaworks
hokiealumnus
04-17-10, 08:27 PM
...and up on the front page!
http://www.overclockers.com/live-benching-bobnova-dry-ice/
EDIT - Facebook too. :)
Jolly-Swagman
04-17-10, 09:29 PM
Cool good luck Bob going over to watch!
ghost_recon88
04-18-10, 12:52 AM
Congrats on your scores tonight Ed (Bobnova).
Bobnova
04-18-10, 01:19 AM
Thanks ghost, i'm pretty pumped!
My pifast wasn't real great, but the WP scores make up for it!
bobs going to be benching live in half an hour or so! you know you wanna stop by ;)
ghost_recon88
04-30-10, 07:13 PM
bobs going to be benching live in half an hour or so! you know you wanna stop by ;)
I'll be there for a little bit
Hardass
04-30-10, 07:35 PM
Me too.
Bobnova
04-30-10, 07:36 PM
Starting to get set up now, it'll be the same old link, livestream.com/novaworks
Tonight it'll be Bobnova and his sidekick P5Q Pro vs Konakona's Q6600
got some computer work to do at a friends and will try to make it later. good luck
KonaKona
04-30-10, 08:47 PM
Starting to get set up now, it'll be the same old link, livestream.com/novaworks
Tonight it'll be Bobnova and his sidekick P5Q Pro vs Konakona's Q6600
And I might be able to enjoy it with my trusty sidekick! :D
EDIT: oh, I thought that read tomorrow somehow. :(
Bobnova
05-18-10, 10:23 PM
I should be benching LIVE tomorrow afternoon/evening, from something like 4ish or 5:30ish till whenever the dice runs out (10ish to 12ish). All times are Pacific.
What time i start depends on when i get off work, i aim to have everything prepped and ready to rock and roll before i leave for work so i can pick dice up on the way home and start right away. We'll see if i manage that.
Bobnova
05-19-10, 07:12 PM
I'm live.
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.