WC for 2x gtx 480's ?

I have never water cooled before, however I am picking up two of these. for occasional gaming, but for the most part crunching for seti and other stuff. I need a hardware list, the bad boys pump out the heat I hear.

hi! read those stikies
http://www.overclockers.com/forums/showthread.php?t=628092
These will need a quad rad to keep them cool. they produce a lot alot alot of heat.
other than that
Pump + res + 2 gpu block will be all u need
Mcp 355 or 350
Pump top for mcp 355
ek res 100-150-250
+ 2 gpu block ( the same brand )

A few more links. and many links inside of links. Some should be faved and referred to as you learn more and have more questions

http://www.tomshardware.com/forum/253958-29-watercooling-guide

Make sure you have room for the 120 x 4 radiator. Its around 22 inches. Pretty much the length of a full tower.

Each card generates 300 watts, most is the chip and Vregs. Lots of heat, FC blocks will pull 90% of that heat and it needs cooled.

So you need lots of raddage. Your DT temps should stay under 15C, and thats pretty high, shoot for 10C DT and you'll have a setup that uses lower speed fans and will keep the cards as cool as they need to be.

http://www.overclockers.com/forums/showpost.php?p=6480432&postcount=10