too hot ?

[RisrullarN]

1000@1284, load temp > 50'C
1.8v used! 1.75 default
coppermine cpu!

running so high bcoz i want it quiet.. i can barely hear it now :)
taisol cgk and 80mm@5v w/ chassi side on.

[RisrullarN]

hmm.. actually.. i reduced the voltage to default (1.75) and it now loads@47'C
maybe i can go lower...

[Xaeryan]

Toasty! Which chip is that, the cC0 stepping or the cD0 stepping? (What model is it?)

EDIT: Nevermind, just noticed you said 1.75 vcore default, which = cD0 stepping. I'm hoping my cD0 will go that high too!

[The Doors]

Well, I understand that you want a silent box, but temps above 50 degree C during winter are absolutly high!
I'm using a Glaciator II on my Cellie 2 900@1.25Ghz 1.95v and the temp @full load is around 38-40c with a case temp of 21-22c and an ambient of 20c, so I suppose that you have to consider another HeatSink, or mod your case for a blowhole, on the left panel of Case, ducted to the HS ;)

[RisrullarN]

ill install a 80mm to blow in some air.. bbl with report :)

[The Doors]

No fans at the moment into your case?

[RisrullarN]

just one @ the cpu running @5v..
im gonna get some more cables to make the other ones run at 5 or 7 too, then i should be able to keep it around 40-44 maybe. :)
time will tell

since im running @ default voltage heat isnt as dangerous as in other cases, aight?

[The Doors]

Well, I suggest you to use at least a couple of Case fans, one for the intake in the front/low, and another one for the exhaust up/back, coz even if at stock voltage, your cpu is OCed! ;)

[deez]

heat is always dangerous even in a non overclocked comp